Almost There: 01’ XJ Build
#46
Senior Member
Thread Starter
Join Date: Jul 2010
Location: Japan
Posts: 913
Likes: 0
Received 5 Likes
on
5 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 L I6
wheelin'
Well yesterday I got to go wheelin with some buddies and man it was a fun time. Started about 9am and finished around 5pm haha. We did the 3 gulches- Hacket, metbury, and longwater. Here are a few of the pictures of me.
here are the rest of the pictures if you want to see them
here are the rest of the pictures if you want to see them
#48
Senior Member
Thread Starter
Join Date: Jul 2010
Location: Japan
Posts: 913
Likes: 0
Received 5 Likes
on
5 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 L I6
haha I woulda invited you but it was a buncha military dudes I just met and figured since we had to wake up at like 630 to meet up with them and didn't get done till like 5pm it'd be hard to convince you to go with only a days notice haha next time we go though I'll let you know for sure man. It was a blast. The pictures definately don't do the trails justice.
#49
Senior Member
Thread Starter
Join Date: Jul 2010
Location: Japan
Posts: 913
Likes: 0
Received 5 Likes
on
5 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 L I6
Well here is my new custom made double cardon driveshaft I just installed:
I also got a picture of my jeep with all the lights on I just need to adjust the roof lights a little better:
Also went wheeling today with FlemingXJ. Good fun before the snow hit tonight. Here we are on a big rock haha.
and his buddy's attempt at mudding, but falling into a a deep hole in the ice haha. I had to tow him out because his back wheels were off the ground.
Thats about it for now. Have a good night everyone.
I also got a picture of my jeep with all the lights on I just need to adjust the roof lights a little better:
Also went wheeling today with FlemingXJ. Good fun before the snow hit tonight. Here we are on a big rock haha.
and his buddy's attempt at mudding, but falling into a a deep hole in the ice haha. I had to tow him out because his back wheels were off the ground.
Thats about it for now. Have a good night everyone.
#50
Senior Member
Thread Starter
Join Date: Jul 2010
Location: Japan
Posts: 913
Likes: 0
Received 5 Likes
on
5 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 L I6
Yesterday I finally fixed my sway bar so now I can go on the freeway again. I broke the "bullet pin" on my rubicon express sway bar discos wheeling awhile ago. I made some new ones yesterday and I am pretty happy with them.
I basically furnished a "PTO Draw pin" like this:
Here are some pics:
This following picture is where I got the idea from. These aren't my disconnects, but I would like to make some for myself eventually because the rubicon express ones I have suck. Here is a link to how the guy made them: link
I also tested the flex a little bit and realized how much I need further extended bump stops up front. I need about 3" more to make the bump stop even useful.
I basically furnished a "PTO Draw pin" like this:
Here are some pics:
This following picture is where I got the idea from. These aren't my disconnects, but I would like to make some for myself eventually because the rubicon express ones I have suck. Here is a link to how the guy made them: link
I also tested the flex a little bit and realized how much I need further extended bump stops up front. I need about 3" more to make the bump stop even useful.
#51
Senior Member
Thread Starter
Join Date: Jul 2010
Location: Japan
Posts: 913
Likes: 0
Received 5 Likes
on
5 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 L I6
Today I finally cleaned my extremely dirty engine bay. I know this isn't much of a mod but I figured you all might be interested in how to make an engine look brand new . Here are some pictures 20 min after everything dried:
Also cleaned the rest of it up for the first time in months:
A guy I know who details cars for a living told me the best products to use.
Here is a little "how-to" for anyone who has a nasty engine bay like mine used to be and wants to clean it.
1.Disconnect the (-) terminal and cover the intake and fuse box with towels
2. Spray the whole engine bay down down with a pressure washer.
3. Spray some Purple power or equivalent degreaser on everything and let sit.
4. Wash off with pressure washer.
5. Spray a can of this amazing stuff CD2 engine cleaner (could only find it at checkers) and let sit with the engine on for about 10-20 min-dont wash off.
Also cleaned the rest of it up for the first time in months:
A guy I know who details cars for a living told me the best products to use.
Here is a little "how-to" for anyone who has a nasty engine bay like mine used to be and wants to clean it.
1.Disconnect the (-) terminal and cover the intake and fuse box with towels
2. Spray the whole engine bay down down with a pressure washer.
3. Spray some Purple power or equivalent degreaser on everything and let sit.
4. Wash off with pressure washer.
5. Spray a can of this amazing stuff CD2 engine cleaner (could only find it at checkers) and let sit with the engine on for about 10-20 min-dont wash off.
Last edited by gvns8; 12-10-2010 at 10:49 PM.
#52
Senior Member
Thread Starter
Join Date: Jul 2010
Location: Japan
Posts: 913
Likes: 0
Received 5 Likes
on
5 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 L I6
Today I installed a new Valve Cover Gasket. I've had a slow leak since I bought my xj and finally got around to putting in a new gasket. Here are some pics- pretty easy process.
Here is what the leak looked like:
And what I did:
I used the best available gasket so hopefully I wont have to worry about this again.
Here is what the leak looked like:
And what I did:
I used the best available gasket so hopefully I wont have to worry about this again.
#54
Senior Member
Thread Starter
Join Date: Jul 2010
Location: Japan
Posts: 913
Likes: 0
Received 5 Likes
on
5 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 L I6
Hey, if you are talking about the spring spacers, I am planning on actually cutting them down a little and adding them to my front eventually to level it out. I think these are the 2" spacers I bought though on ebay for about $30: here is a Link.
Last edited by gvns8; 01-12-2011 at 02:46 PM.