96 XJ "Higher Love"
Thread Starter
CF Veteran
Joined: May 2011
Posts: 2,516
Likes: 4
From: va
Year: 1996
Model: Cherokee
Engine: i-6 4.0
Small up-date
My dash lights and center console.

My cargo area with all trail/dd gear

Also going to sell a ton of crap soon to clean my room up, its become a storage room
BUMPER UPDATE: geting a brush guard welded to it Thursday if the price is okay for the pipe
1 1/2" x .250
Going to look like the warn brush guard, again IF I can pay for it.
My dash lights and center console.

My cargo area with all trail/dd gear

Also going to sell a ton of crap soon to clean my room up, its become a storage room

BUMPER UPDATE: geting a brush guard welded to it Thursday if the price is okay for the pipe
1 1/2" x .250
Going to look like the warn brush guard, again IF I can pay for it.
Last edited by jeepsurfer1; Jun 24, 2012 at 11:25 PM. Reason: pipe size
Thread Starter
CF Veteran
Joined: May 2011
Posts: 2,516
Likes: 4
From: va
Year: 1996
Model: Cherokee
Engine: i-6 4.0
also going to see if this local shop dose a good job, if they do they'll be making... 
1 control arm drop brackets
2 shackle relocation brackets
3 steering box brace, both the spacer and the brace
4 and if they are really good a ford dana 44 hp front cut down to stock size and new coil/ca mts

1 control arm drop brackets
2 shackle relocation brackets
3 steering box brace, both the spacer and the brace
4 and if they are really good a ford dana 44 hp front cut down to stock size and new coil/ca mts
Seasoned Member
Joined: Oct 2010
Posts: 458
Likes: 4
From: Jville, NC / Troy, NC
Model: Grand Cherokee
Engine: 4.0
Why not long arms instead of drop brackets?
Also why narrow a good axle and lose a huge benifit to the swap just get a 9" to match the width and your good.
Also why narrow a good axle and lose a huge benifit to the swap just get a 9" to match the width and your good.
Last edited by biggoofy; Jun 25, 2012 at 05:30 AM.
Thread Starter
CF Veteran
Joined: May 2011
Posts: 2,516
Likes: 4
From: va
Year: 1996
Model: Cherokee
Engine: i-6 4.0
Originally Posted by biggoofy
Why not long arms instead of drop brackets?
Also why narrow a good axle and lose a huge benifit to the swap just get a 9" to match the width and your good.
Also why narrow a good axle and lose a huge benifit to the swap just get a 9" to match the width and your good.
Thread Starter
CF Veteran
Joined: May 2011
Posts: 2,516
Likes: 4
From: va
Year: 1996
Model: Cherokee
Engine: i-6 4.0
ill have them mounted and on in about 2 weeks, I've been working dubble shifts since sat so I should have a bit of cash left over to get them on but first im going to change my ball joints on both sides the top one on the drivers side is bad, the old tire in running is shot on the inside...
Member
Joined: Mar 2012
Posts: 205
Likes: 0
From: Salem,Virginia
Year: 1992
Model: Cherokee
Engine: 4.0
The one in front is 50% the rest are 90ish plus still have the wax on them, going to buy 1 new to match
Attachment 128126
Attachment 128126
Thread Starter
CF Veteran
Joined: May 2011
Posts: 2,516
Likes: 4
From: va
Year: 1996
Model: Cherokee
Engine: i-6 4.0
Originally Posted by zjjerk

Also its 102 today and my buddy with a pool is at work! And I would be too but traded to have the day off







