88 Limited-Building My Cousin's Jeep
#1
CF Veteran
Thread Starter
Join Date: Feb 2012
Location: Hamburg AR
Posts: 1,249
Likes: 0
Received 12 Likes
on
11 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 HO
88 Limited-Building My Cousin's Jeep
My cousin wanted an offroad toy. At first he wanted a toyota. Then he went and looked for one. He cam back shocked at how much people wanted for junk. I guess after that he went riding with me in mine and he told me that he wanted a Cherokee. Wise choice for him. He is 17 years old and wants to learn how to work on stuff too. He ask me if I would mentor him threw it. So of course I will. I am excited about this Jeep because I get to work on it and it dont cost me haha.
So here is what we picked up.
Its dirty in the pictures. The buddy we got it from didn't really want to sell it but money talks haha. He blew the D35 on a ride about 8 months ago and had not touched since.
1988
Limited
NP242
AW4
180K 4.0L
703 injectors (I sold them to the buddy a while back)
Winch bumper
33 12.50 15 BFG MT's (70 %)
D35- Already have the 8.25 to put under it. Getting it out of my donor jeep.
Rearend
Engine- nothing appears to be wrong.
Interior- Decent shape leather not torn to bad. (wiring issues with power seats)
Rust- very little on the drivers side floorboards
Transfercase- No issues other than being the 242. Not a bad case just no real aftermarket support.
Tranny- Good to go AW4 is bullet proof
Front end- hubs are tight, front shaft joints have a little life left. LCA and UCA bushings are worn out. Rest looks good
Here are some pictures of it that I had from when it was the PO's
The winch is actually on my jeep now. I bought it from him a few months ago
This was abt 2 years ago on a ride with us.
So here is what we picked up.
Its dirty in the pictures. The buddy we got it from didn't really want to sell it but money talks haha. He blew the D35 on a ride about 8 months ago and had not touched since.
1988
Limited
NP242
AW4
180K 4.0L
703 injectors (I sold them to the buddy a while back)
Winch bumper
33 12.50 15 BFG MT's (70 %)
D35- Already have the 8.25 to put under it. Getting it out of my donor jeep.
Rearend
Engine- nothing appears to be wrong.
Interior- Decent shape leather not torn to bad. (wiring issues with power seats)
Rust- very little on the drivers side floorboards
Transfercase- No issues other than being the 242. Not a bad case just no real aftermarket support.
Tranny- Good to go AW4 is bullet proof
Front end- hubs are tight, front shaft joints have a little life left. LCA and UCA bushings are worn out. Rest looks good
Here are some pictures of it that I had from when it was the PO's
The winch is actually on my jeep now. I bought it from him a few months ago
This was abt 2 years ago on a ride with us.
Last edited by BatmanXJ; 03-05-2014 at 06:36 PM.
Thread
Thread Starter
Forum
Replies
Last Post
StPTrucker
Introductions
30
11-22-2015 05:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)