Jeep Builds Make your own jeep build thread here, discuss and view jeeps here. All Jeep models are welcome here.
Sponsored by:
Sponsored by:

6.0 ls xj build!

Old Jul 12, 2017 | 11:52 AM
  #16  
barney3's Avatar
Thread Starter
Newbie
 
Joined: Jul 2017
Posts: 10
Likes: 0
Model: Cherokee
Default

I've heard the Volvo fans are great. What year vehicle uses that fan? I'll have to read up on wiring and try to find one.
Reply
Old Jul 12, 2017 | 04:17 PM
  #17  
cleenrob's Avatar
CF Veteran
10 Year Member
 
Joined: Jul 2012
Posts: 4,104
Likes: 2
From: San Antonio, TX
Year: 1996
Model: Cherokee
Engine: 4.0L
Default

Originally Posted by barney3
I've heard the Volvo fans are great. What year vehicle uses that fan? I'll have to read up on wiring and try to find one.
I think mine was from a 96 640

they're great the controller is easy the gm PCM ground triggers the Volvo controller. Plus if you look hard enough you can find plug an play maxi fuses holder with all the right pig tails.
Reply
Old Jul 12, 2017 | 04:21 PM
  #18  
barney3's Avatar
Thread Starter
Newbie
 
Joined: Jul 2017
Posts: 10
Likes: 0
Model: Cherokee
Default

I've been looking on ebay and there are a bunch of volvo and taurus fans and harnesses. YouTube has some good tutorials also. I'll probably start out with this and see how it works with a 22x19x3 Griffin radiator. Definitely a cheaper alternative to the Novak radiator and fans which would be around $700. Thanks!
Reply
Old Jul 12, 2017 | 06:24 PM
  #19  
barney3's Avatar
Thread Starter
Newbie
 
Joined: Jul 2017
Posts: 10
Likes: 0
Model: Cherokee
Default

So I think I'll be able to get the jeep in my shop on Monday to start pulling the 4.0 and trans. Does anyone have any advice before I start pulling everything? Problems I might run into? I'll be labeling every connection in the wiring harness as I go along so I can pull out all the wires I don't need.
Reply

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:31 AM.