2000 High School DD Project
#287
Senior Member
Thread Starter
Join Date: Mar 2008
Location: Maryland
Posts: 644
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
Engine: 4.0L I6
bumper is on!
so the bumper is on finally...im sooo happy and it looks pretty good IMO...
the only bad thing is that the paint is pisssing me off...i did everything right to paint bare steel but the bedliner is peeling off...i cleaned it down for 45 minutes with acetone, made several light coats of primer, let the primer heal for 5 hours, then lay down the bedliner...looks like i will have to re-do it sooner or later...
all the lights and blinkers are fixed...but the headlight brackets/bezels (whatever) had to be trimmed to fit the brushguard...it doesnt really bother me that much because you cant really tell...
heres some pics...
the only bad thing is that the paint is pisssing me off...i did everything right to paint bare steel but the bedliner is peeling off...i cleaned it down for 45 minutes with acetone, made several light coats of primer, let the primer heal for 5 hours, then lay down the bedliner...looks like i will have to re-do it sooner or later...
all the lights and blinkers are fixed...but the headlight brackets/bezels (whatever) had to be trimmed to fit the brushguard...it doesnt really bother me that much because you cant really tell...
heres some pics...
#291
CF Veteran
Join Date: Nov 2008
Location: Eugene, OR
Posts: 1,251
Likes: 0
Received 0 Likes
on
0 Posts
Year: 01
Model: Cherokee
Engine: 4.0L I6
jeep looks good, but try a different paint if the bedliner is peeling. i sanded the crap out of my bumper and cleaned it with paint thinner. then put about 4 coats of primer on it, then hit it with about 5 coats of rustoleum hammered. gives it that kinda textured look that you get from the bedliner but will probly hold up a little better.
#293
Member
Join Date: May 2009
Location: White Lake, MI
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
So I noticed this thread kinda died off. Hows your Jeep coming along?
Also, I was wondering how the AAL was holding up? Any sagging or anything like that? Did you have any vibes that needed to be taken care of?
Also, I was wondering how the AAL was holding up? Any sagging or anything like that? Did you have any vibes that needed to be taken care of?
#294
Senior Member
Thread Starter
Join Date: Mar 2008
Location: Maryland
Posts: 644
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
Engine: 4.0L I6
the AAL is holding up ok for now...it has sagged about .5"
i plan on getting s10 leaf springs with in a month to get more clearance...
as far as vibes i have a slight vibration when accelerating from a dead stop to less than 5mph...
i plan on getting s10 leaf springs with in a month to get more clearance...
as far as vibes i have a slight vibration when accelerating from a dead stop to less than 5mph...
#296
Senior Member
Thread Starter
Join Date: Mar 2008
Location: Maryland
Posts: 644
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
Engine: 4.0L I6
idk if you wanna call it wheeling lol but they had an obstacle course at the PA jeep show a couple weeks back...so i did that...but i will be heading back to rausch creek within a couple weeks...
pics in a little...
pics in a little...
Thread
Thread Starter
Forum
Replies
Last Post
Azzy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-08-2015 10:49 PM
Cherokee_Mike
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
09-05-2015 09:28 AM
2000JGC
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
09-03-2015 09:53 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)