**** being cold, I got carhartts I'm going to work on my jeep.

 

Cool to see you building this. Text me sometime if you need a hand

 

thanks man, and I will.

 

Def subbing this. Looks like a sick project ahead for ya

 

Subbed

 

hey bud where are you buying your metal local?

 

More than likely fisher steel in rossville

 

yep best prices around on everything I have needed. Nice people, they don't charge for cuts. I highly recommend them.

 

Off topic, but did you use 2x6 .25" for teh sliders on your other XJ?

 

2x6x.188. I'll do the same on this one.

 

Thanks I've been there.I've got the material for my front bumper at spangler sheet metal.they seem high but convenient

 

I went and got this big chunk of Pure American steel and, sex appeal today. Foooo freeeee!

 

Subbed. I am in the middle of dropping a built 350 in my 96' XJ. I figured the drive shafts and axles would be the next things I tear up and looking at putting 1 tons under it so I am interested in seeing how yours turns out.

 

I got a big pile of parts from ruffstufff today. These brackets are bad ***, they go together like Legos, and are super beefy. The 2x4 tube clevis tabs are cool. There's tons of weld area on them, and they fit up perfect. The axle tabs will have to be notched a little bigger for the huge 14 bolt tubes, and I'm gonna notch the lower frame bracket to 2 inch to fit one of the scrap pieces I'm gonna have from building my links. Oh yea, these heims are enormous.

 

Subbed, I'm thinking about doing dana 60 front 14bolt rear in my MJ but leafs all around.