1993 Cherokee Country
#17
Junior Member
Thread Starter
Join Date: Jul 2010
Location: Canton, MI
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
Updated Pics
Here are some new pictures of the Cherokee after getting the lift fixed. It now sits at about 5" in the back and 4.5" in the front. Now i just want to get he fenders trimmed, and possibly a new OD paint job.
#22
Junior Member
Thread Starter
Join Date: Jul 2010
Location: Canton, MI
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
I realized that i never got around to posting pictures of my rear section of the Jeep before and after i patched it. I orignially just cut a sheet of aluminum diamond plate and laid it in, but was still too noisy. The second i attempt i pulled it all up and fiberglassed the whole rear before relaying the diamond plate with some sound deadening material to quiet it up a bit.
i will post some after pics once i get them off my camera.
i will post some after pics once i get them off my camera.
#23
Junior Member
Thread Starter
Join Date: Jul 2010
Location: Canton, MI
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
Went to the Badlands this weekend for my friends final tree race of the year. He ended up rolling it going 65 on lap two but we still wheeled a bunch which made up for it.
#27
Junior Member
Thread Starter
Join Date: Jul 2010
Location: Canton, MI
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
So I have been brain storming my next moves once I finish college in February. So far I have come up with the following parts for my lift.
BDS longarms-$1000 (Shaun)
IRO Double shear trackbar-$200 (IRO)
RE 4.5" leaf spring-$280 (Serious Offroad)
RE 5.5" coil springs-$90 (Serious Offroad)
SYE & Driveshaft -$500 (Rustys)
Brakelines (unsure)
Shocks (unsure)
If there is anything else people can think of or wish to comment on I'm open to suggestions. Some of my current parts will be reused like extended shackle and coil spacer.
BDS longarms-$1000 (Shaun)
IRO Double shear trackbar-$200 (IRO)
RE 4.5" leaf spring-$280 (Serious Offroad)
RE 5.5" coil springs-$90 (Serious Offroad)
SYE & Driveshaft -$500 (Rustys)
Brakelines (unsure)
Shocks (unsure)
If there is anything else people can think of or wish to comment on I'm open to suggestions. Some of my current parts will be reused like extended shackle and coil spacer.
#28
Junior Member
Thread Starter
Join Date: Jul 2010
Location: Canton, MI
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
So I have been brain storming my next moves once I finish college in February. So far I have come up with the following parts for my lift.
BDS longarms-$1000 (Shaun)
IRO Double shear trackbar-$200 (IRO)
RE 4.5" leaf spring-$280 (Serious Offroad)
RE 5.5" coil springs-$90 (Serious Offroad)
SYE & Driveshaft -$500 (Rustys)
Brakelines (unsure)
Shocks (unsure)
If there is anything else people can think of or wish to comment on I'm open to suggestions. Some of my current parts will be reused like extended shackle and coil spacer.
BDS longarms-$1000 (Shaun)
IRO Double shear trackbar-$200 (IRO)
RE 4.5" leaf spring-$280 (Serious Offroad)
RE 5.5" coil springs-$90 (Serious Offroad)
SYE & Driveshaft -$500 (Rustys)
Brakelines (unsure)
Shocks (unsure)
If there is anything else people can think of or wish to comment on I'm open to suggestions. Some of my current parts will be reused like extended shackle and coil spacer.
#29
Junior Member
Thread Starter
Join Date: Jul 2010
Location: Canton, MI
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
I pulled out my carpet tonight because I new the floor needed some work and I want to use raptor liner on the floors. I knew it had been repaired before but they have already rusted through. The previous owner didn't paint or seal the metal at all.
#30
Junior Member
Thread Starter
Join Date: Jul 2010
Location: Canton, MI
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
I had to replace my front passenger fender so I figured it would be a good time to trim the front fenders. I went and picked up a "new" fender from my local junkyard and trimmed it and put on some door edging. Ignore the different colors as I will be painting it in the near future. I am also in the process of trimming and folding the rear fenders and also the rear quarters.