1992 XJ- Green Lantern..
07-27-2011, 08:51 PM
#47
Member
Thread Starter
Join Date: Jul 2011
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
07-27-2011, 10:13 PM
#48
Member
Thread Starter
Join Date: Jul 2011
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
I may go full width.. Dana 60s are for the truggy.
Also examined the front axle and how its attached to the body and the whole front axle wiggles around. Track bar bushings are bad or just the whole axle is bad
Also examined the front axle and how its attached to the body and the whole front axle wiggles around. Track bar bushings are bad or just the whole axle is bad
07-28-2011, 04:36 PM
#49
Member
Thread Starter
Join Date: Jul 2011
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
I found a Transfercase!!! Its a NP242J-- Same as what my grenaded transfercase was.
I bought it for $25 and it looks perfect on the inside. I'm going to buy a chain tonight and then after I have that swap out axles
I bought it for $25 and it looks perfect on the inside. I'm going to buy a chain tonight and then after I have that swap out axles
07-28-2011, 09:15 PM
#51
Member
Thread Starter
Join Date: Jul 2011
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Buying a transfer drop kit, chain, and still trying to find a front driveshaft and I'll be all good to break something else at RockFest!
Last edited by 92XJL; 07-28-2011 at 09:18 PM.
08-28-2011, 08:02 PM
#53
Member
Thread Starter
Join Date: Jul 2011
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
OK fellas!! So the Jeep HASN'T been sold and after Rockfest in Auburn, AL this weekend, I'm keeping the Jeep!
Heres today's progress and more pictures of the grenaded Transfercase:
Heres today's progress and more pictures of the grenaded Transfercase:
08-29-2011, 11:23 PM
#54
Member
Thread Starter
Join Date: Jul 2011
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
8/29/11:
I've done more work yet again!
Going to get a new front driveshaft later this week along with being on the lookout for D44 axles and a Dana 20 T-case.
I've done more work yet again!
Going to get a new front driveshaft later this week along with being on the lookout for D44 axles and a Dana 20 T-case.
09-03-2011, 12:14 PM
#57
Member
Thread Starter
Join Date: Jul 2011
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
9/3/11:
Bought a AC bypass pulley, Transmission mount and a front driveshaft. Now have to buy new u-joints and oil and the Jeep will live on! Until I get the D44/F9" axle conversion
Bought a AC bypass pulley, Transmission mount and a front driveshaft. Now have to buy new u-joints and oil and the Jeep will live on! Until I get the D44/F9" axle conversion
09-03-2011, 02:49 PM
#59
Member
Thread Starter
Join Date: Jul 2011
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee