01 XJ Build Thread 'Burgendy Heep'
#16
Junior Member
Thread Starter
Join Date: Dec 2011
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Thanks I appreciate that!
That's a bummer! It's a nice yearly event! Maybe see you out there next year! Hopefully by then I will be locked and caged!
Not entirely sure what you mean?
Not entirely sure what you mean?
#17
CF Veteran
Join Date: Mar 2012
Location: whiting
Posts: 1,414
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Originally Posted by VhoffXJ
I am just going to make this easy and upload group of photo's of stuff that I did to the Jeep last summer in 2011!
Summer of 2011' Modifications
Reese Trailer Hitch
Set of drilled and slotted rotors!
Rough Country Trac Bar
Jeep is now de badged and detailed!
JKS Sway Bar Disconnects
Gave me a little trouble!
Cutting the fenders for Bushwackers!
Oops still have not fixed this!
NEW BUMPERS! (logansmetals4x4)
Tuff Stuff 12,500lb Winch!
Out with the old, In with the new!
Gotta love boxes!
15x8 4" BS Cragar Soft 8's
Finally upgraded to 33x12.5r15 Goodyear Wrangler Kevlars!
I think that pretty much sum's up the summer fun for 2011!
Summer of 2011' Modifications
Reese Trailer Hitch
Set of drilled and slotted rotors!
Rough Country Trac Bar
Jeep is now de badged and detailed!
JKS Sway Bar Disconnects
Gave me a little trouble!
Cutting the fenders for Bushwackers!
Oops still have not fixed this!
NEW BUMPERS! (logansmetals4x4)
Tuff Stuff 12,500lb Winch!
Out with the old, In with the new!
Gotta love boxes!
15x8 4" BS Cragar Soft 8's
Finally upgraded to 33x12.5r15 Goodyear Wrangler Kevlars!
I think that pretty much sum's up the summer fun for 2011!
#18
Junior Member
Thread Starter
Join Date: Dec 2011
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
#19
Originally Posted by tombug
Does the front bumper has tie ins?
#20
Member
Join Date: Sep 2011
Location: Raleigh, NC
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Nice rig bro. I have an 01 also and was planning on going with 33's when I lift it too. Do you have any vibrations without a SYE and how do it pull without re-gearing.
#21
CF Veteran
Join Date: Mar 2012
Location: whiting
Posts: 1,414
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Originally Posted by VhoffXJ
Right on! Also I had those same MT wheels that you had and sent them back... Mistake. Looks good on yours!
#22
Junior Member
Thread Starter
Join Date: Dec 2011
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Opps! Still bad *** wheel!
#23
when you deleted the cat does the engine light came on? how hard is it to remove the front doors? i heard the 00-01 door latch pins are more difficult to remove than the earlier xj.
#25
Junior Member
Thread Starter
Join Date: Dec 2011
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Now for the doors, pre years are a lot easier to do! For mine my friend helped me cut the OEM door pins, from there I order new door pins witch work great for removal and the door shuts fine and has minimal sag. For removal all I have to do is remove these 3-4 electrical plugs from under the dash by your feet, run them thew the fender and then pop the pins out and door is off. It takes me around 10minutes for both now. Also sense the electrical wiring takes abuse from this I wrapped it more in electrical tape to help it from damaging the wire.
Thanks man!
#26
Junior Member
Thread Starter
Join Date: Dec 2011
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Wanted to show you guy's this CB mount that my buddy made for me!
I am running a 3" spring with a 4' Firestik, It is great on the trails! It does go into a death cycle when your on the freeway with some high winds! I have a video I will try to upload to show you what I mean.
I am running a 3" spring with a 4' Firestik, It is great on the trails! It does go into a death cycle when your on the freeway with some high winds! I have a video I will try to upload to show you what I mean.
#27
Junior Member
Thread Starter
Join Date: Dec 2011
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Did a little work this morning, replaced the U-Joints on my front shaft, along with a centering ball!
I used all Spicer joints, with are greaseable from the end caps.
I used all Spicer joints, with are greaseable from the end caps.
#28
Junior Member
Thread Starter
Join Date: Dec 2011
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
This Friday at my buddy's shop where a hoist will come in handy, Starting the Long Arm Install, I will be for sure to take a lot of detailed pictures!
With some stretch's!
With some stretch's!
#30
Junior Member
Thread Starter
Join Date: Dec 2011
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee