V.A. Cherokee Club
Newbie
Joined: Jun 2012
Posts: 3
Likes: 0
Model: Cherokee
dont have a clue to get there dont know anyone that can draw me a map sotospeak. where is that pick apart your talkin bout we got a pick and save with 4 xj's. just converted my 88 xj center console to a 97 with cup holders. love it
Don't see a pic.
Also you can run Shoe Creek/Crabtree Falls. That's in Lynchburg area. You can do that whole trail stock. I went one time with a bunch of guys from there in Lynchburg and from other counties also and one guy had a 2WD cherokee go through the whole trail. He had to go around in a few places but he made it all the way through none the less.
Also you can run Shoe Creek/Crabtree Falls. That's in Lynchburg area. You can do that whole trail stock. I went one time with a bunch of guys from there in Lynchburg and from other counties also and one guy had a 2WD cherokee go through the whole trail. He had to go around in a few places but he made it all the way through none the less.
Thread Starter
CF Veteran
Joined: Jan 2011
Posts: 1,635
Likes: 0
From: Virginia
Year: 1999
Model: Cherokee
Engine: 4.0
The Pick-a-Part is off Rt1 in Fredericksburg between the Massaponix exit off 95 (which is now called the Spotsylvania exit) and the Thornburg exit off 95.
CF Veteran
Joined: May 2011
Posts: 3,380
Likes: 0
From: Partlow, va
Year: 1994
Model: Cherokee
Engine: 4.0 i6, 307 injectors
Originally Posted by aquickmopar
Man that's another thing I gotta add to my list of things that need to get done. I have one but just haven't found time to install it yet.
CF Veteran
Joined: May 2011
Posts: 3,380
Likes: 0
From: Partlow, va
Year: 1994
Model: Cherokee
Engine: 4.0 i6, 307 injectors
Originally Posted by BarryB
Always something... I have 4 lights, wiring harnesses, 2 switches and 2 relays to wire into my XJ. Had the lights for like 6 mos.
CF Veteran
Joined: May 2011
Posts: 3,380
Likes: 0
From: Partlow, va
Year: 1994
Model: Cherokee
Engine: 4.0 i6, 307 injectors
Originally Posted by NuclearCowboy
Fixed my weird idle problem. 2 iacs a tps and a connector later and no more phantom idling. woo hoo!
Member
Joined: Jun 2012
Posts: 170
Likes: 0
From: Culpeper, VA
Year: 1999
Model: Cherokee
Engine: 4.0L H.O.
Hey guys. I'd like your opinions on a few things.
1) I need a new exhaust badly. Mine is rusting through, cat, pipes, and muffler. I was thinking about a Flowmaster Super 44, and a Flowmaster Spun Converter. Good choice, bad choice? Any suggestions or advice?
2) My wheels are all rusty too. I was thinking of starting my mods slow with just the wheels for now, but I don't know if my tires will fit the wheels. I want some 15x8 wheels, but have 215/75/15 tires. Are my tires too thin to fit the 8" wheels? I am looking at Cragar Soft 8's or ION Alloy Type 174 wheels.
So if anyone can share some insight on this, I would be grateful. Any advice or suggestions on what to do is welcome.
Also, if I do either one of these soon, are there any other upgrades that I should do along with it? I don't have the money for a lift or anything too expensive for now, but little things, and needed things I'll do.
Thanks!!
1) I need a new exhaust badly. Mine is rusting through, cat, pipes, and muffler. I was thinking about a Flowmaster Super 44, and a Flowmaster Spun Converter. Good choice, bad choice? Any suggestions or advice?
2) My wheels are all rusty too. I was thinking of starting my mods slow with just the wheels for now, but I don't know if my tires will fit the wheels. I want some 15x8 wheels, but have 215/75/15 tires. Are my tires too thin to fit the 8" wheels? I am looking at Cragar Soft 8's or ION Alloy Type 174 wheels.
So if anyone can share some insight on this, I would be grateful. Any advice or suggestions on what to do is welcome.
Also, if I do either one of these soon, are there any other upgrades that I should do along with it? I don't have the money for a lift or anything too expensive for now, but little things, and needed things I'll do.
Thanks!!