So I am stuck trying to find the bracket that is underneath the power steering. The bracket piece that has the adjuster on it.
None in any of my JY's

 

I had to make my own on my 96 trail rig. The adjuster bolt locked up in the adjuster block so i drilled/tapped out the block to accept some 3/8"x16 threaded rod, welded a nut to the upper end to adjust it with and then extended the rod through the bracket on the lower end. The lock down bolt was still good so I re-used that.

It works just like the stock adjuster did and will be easier to replace if I ever need to again.

 

Hey Travis, I sent you a text earlier. Don't know if you got it or not but im gonna be meeting Kirk at Pick a Part on rt 1 at 9:00 tomorrow morning. Can you meet me there at 9:00 so I can use your pitman arm puller?

 

This is a 91 engine and the brackets are different. ERRRRRRR!!!! Have the main bracket the the pump bolts onto. Just missing the rest. Anybody know of any 91,92 or 93 xjs in a jy?

 

Im headed to the Junk yard today. I'll take a look.

 

Ill bring it

 

Okay, your sig said "96 XJ". JY is your friend in this case.

 

Alright sweet man thanks. Hope that's not to early for ya this Saturday morning. Lol.

 

No im up because my kids

 

Yeah, saw that. My bad. None of the scrap yards here have any. One scrap yard crushed 8 in the last 3 months Almost cried!!!

 

Thanks bud.

 

No prob. So your looking for the bracket that holds the power steering pump on or are you looking for the adjustment pully bracket?

 

Never mind I read a few posts up that you have the power steering pump bracket but you need the adjuster pulley bracket and mechanism.

 

And I think there is a bracket that goes in between the pulley and pump on the top side.

 

Best $5 Ive spent for a tool