Installed a thrusher glass pack today. She sounds good,

 

Sold my xj

I have a driver power seat base with most likely bad motors and a rear door power lock. left over.

Free to anyone who can pick them up in the next day or two.

I'm in Va. Beach near Trashmore.
four 7 too 73five 3

 

Got my winch rope on and a factor 55 thimble thanks to Olympus Off road

Also got my 20" led bar on from them as well

 

Hey all need some help trying to figure out how to wire multiple lights. I have 2 sets of light force striker 170 with wire harnesses and a set off hella 500 and I need to make a harness. The 170 are going on my bumper and front of roof rack. The hellas are going on the rear of the rack. How do I do this with out a cluster of crap. Please help. Ty

 

Wire them in so that every 2 lights are on a relay and switch (6 lights = 3 relays and switches). This will protect from fires caused by shorts/overloads.

 

Each light is on its on relay and fuse. Just trying to figure how to conect them all to the battery

 

Use something like this and bolt it to the terminal clamp.

http://m.homedepot.com/p/Blackburn-C...1-6/202907536/

 

Here let me re frase by having 3 different sets of lights and all the wires how do I clean bit up? Do I splice all the power and negatives together or is there something I can attach them to then run a separate power and negative to the battery?

 

Ok guys need some help. I was under the jeep and saw exposed wire to the starter and im getting a wild hair up my but to do a rewire for the starter alt batter using 4g wire . But not sure how. Any ideas

 

I wouldn't splice it all together. I would keep each set separate and use zip ties to keep them together tightly. Then if you need it use wiring loom

 

I need to make friends who knows how to wire lights with relays hahaha, I'm going to burn my xj to the ground oneday.

 

Okay here's what I did for my wires I went to marine one on Virginia Beach Boulevard and bought a blue sea relay box and I went to Autozone and bought a breaker wired everything into the fuse block then wired the breaker to the fuse box and cleaned up all my wires

 

Now I have a question has anyone done the hood lift mod to increase airflow

 

I've heard a lot of good things,

 

I do to. But would like to hear it from some one who has done it to get an idea