North Atlantic Maine, New Hampshire, New York, Vermont, Massachusetts, Rhode Island, Connecticut, New Jersey, Delaware, Pennsylvania, Maryland, Washington DC

PA cherokee club

Thread Tools
 
Search this Thread
 
Old Apr 3, 2013 | 08:22 PM
  #5326  
bighouts5591's Avatar
CF Veteran
 
Joined: Nov 2011
Posts: 1,469
Likes: 0
From: State College, PA
Year: 1995
Model: Cherokee
Engine: 4.0 I6
Default

Originally Posted by bobsxj
So when I turn my wheel there's a pop sound maybe the track bar its has a lot of play moving up and down..how do you fix this or do you replace the whole thing..I do have a wobble
If there's play in the track bar replace it. If its the stock bar you have to do the whole thing, otherwise its just an end. For a popping noise when turning check your hubs and u-joints
Reply
Old Apr 3, 2013 | 08:30 PM
  #5327  
Bretts2000XJ's Avatar
Senior Member
 
Joined: Feb 2013
Posts: 674
Likes: 0
From: SouthEast PA
Year: 2000
Model: Cherokee
Engine: 4.0L
Default

Originally Posted by bighouts5591

If there's play in the track bar replace it. If its the stock bar you have to do the whole thing, otherwise its just an end. For a popping noise when turning check your hubs and u-joints
I was with him its definitely his track bar. It has a lot of play in it. So he will have to replace the track bar then because his is the stock bar. I'm afraid his mount may have an elongated hole which he'd have to correct with a new mount or junkyard mount I'm guessing
Reply
Old Apr 3, 2013 | 08:31 PM
  #5328  
Schutte67's Avatar
Junior Member
 
Joined: Sep 2012
Posts: 109
Likes: 0
From: Pa
Year: 1996
Model: Cherokee
Engine: Straight 6
Default

My power locks stopped working but my power windows still work, Any suggestions?
Reply
Old Apr 3, 2013 | 08:31 PM
  #5329  
foxmxrcer's Avatar
CF Veteran
 
Joined: Dec 2009
Posts: 2,820
Likes: 3
From: Newport, pa
Year: 1997
Model: Cherokee
Engine: 4.0
Default

The rubber bushing is replaceable, not the ball end though.
Reply
Old Apr 3, 2013 | 08:36 PM
  #5330  
Bretts2000XJ's Avatar
Senior Member
 
Joined: Feb 2013
Posts: 674
Likes: 0
From: SouthEast PA
Year: 2000
Model: Cherokee
Engine: 4.0L
Default

Originally Posted by foxmxrcer
The rubber bushing is replaceable, not the ball end though.
Ok the ball end is shot for sure and like I was saying by how much it was poping and moving I think the end elongated the hole in the mount. I'm speaking for him because I was at the junkyard with him this morning and he is not up to speed on all the terminology
Edit: and ball joint is what I mean I don't know why I'm calling it a tie rod end.

Last edited by Bretts2000XJ; Apr 3, 2013 at 08:43 PM.
Reply
Old Apr 3, 2013 | 08:38 PM
  #5331  
Bretts2000XJ's Avatar
Senior Member
 
Joined: Feb 2013
Posts: 674
Likes: 0
From: SouthEast PA
Year: 2000
Model: Cherokee
Engine: 4.0L
Default

Originally Posted by Schutte67
My power locks stopped working but my power windows still work, Any suggestions?
Fuse? I think the pd and pw are seperate fuses but not positive.
Reply
Old Apr 3, 2013 | 09:01 PM
  #5332  
xj_mafia570's Avatar
Member
 
Joined: Sep 2012
Posts: 244
Likes: 0
From: Poconos PA
Year: 1994
Model: Cherokee
Engine: 4.0 DUHHHH!
Default

Originally Posted by Schutte67

And sell me the 31's lol
600$ and there yours bud but i need to find a good set of 31s first
Reply
Old Apr 3, 2013 | 09:25 PM
  #5333  
xLxDIZZYx's Avatar
Senior Member
 
Joined: Oct 2010
Posts: 503
Likes: 1
From: pennsylvania
Year: 1996
Model: Cherokee
Engine: i6
Default

Originally Posted by bobsxj
So when I turn my wheel there's a pop sound maybe the track bar its has a lot of play moving up and down..how do you fix this or do you replace the whole thing..I do have a wobble
Had problem like that replaced everything and still heard the clunk check to make sure the bolts that hold the track bar mount (tie rod end) ain't rusted out. it will make a noise if so. Found that out with mine when I put a double shear track bar
Reply
Old Apr 3, 2013 | 09:41 PM
  #5334  
bobsxj's Avatar
Member
 
Joined: Feb 2013
Posts: 238
Likes: 0
From: Quakertown, PA
Year: 1999
Model: Cherokee
Engine: 4.0 Inline 6
Default

Originally Posted by xLxDIZZYx

Had problem like that replaced everything and still heard the clunk check to make sure the bolts that hold the track bar mount (tie rod end) ain't rusted out. it will make a noise if so. Found that out with mine when I put a double shear track bar
Yeah I'm planing get a good track bar and replace everything.. anyone know a cheap but good track bar?
Reply
Old Apr 3, 2013 | 11:18 PM
  #5335  
xLxDIZZYx's Avatar
Senior Member
 
Joined: Oct 2010
Posts: 503
Likes: 1
From: pennsylvania
Year: 1996
Model: Cherokee
Engine: i6
Default

Originally Posted by bobsxj

Yeah I'm planing get a good track bar and replace everything.. anyone know a cheap but good track bar?
Check this spot out has a bracket n a piece to make ur factory track bar double shear
http://www.ironrockoffroad.com/Merch...egory_Code=PFX
Reply
Old Apr 3, 2013 | 11:32 PM
  #5336  
diesel.wrench's Avatar
Member
 
Joined: Mar 2013
Posts: 149
Likes: 0
From: Philadelphia, PA
Year: 1999
Model: Cherokee
Engine: 4.0
Default

Originally Posted by xLxDIZZYx

Check this spot out has a bracket n a piece to make ur factory track bar double shear
http://www.ironrockoffroad.com/Merch...egory_Code=PFX
What's the difference between the adjustable track bar and the double shear one?
Reply
Old Apr 3, 2013 | 11:45 PM
  #5337  
ehracing67's Avatar
CF Veteran
 
Joined: Aug 2011
Posts: 1,090
Likes: 0
From: Lehigh Valley, Pennsylvania
Year: 1999
Model: Cherokee
Engine: 4.0 stroked to 4.6, Thanks to Teasdale'sMachine!
Default

Originally Posted by diesel.wrench

What's the difference between the adjustable track bar and the double shear one?
IRO's adjustable track bar uses your factory mount and a tie rod type end. The length is still adjustable. The double shear is also adjustable but uses a different frame mount to achieve the "double shear" or through bolt design.
Reply
Old Apr 4, 2013 | 12:44 AM
  #5338  
xLxDIZZYx's Avatar
Senior Member
 
Joined: Oct 2010
Posts: 503
Likes: 1
From: pennsylvania
Year: 1996
Model: Cherokee
Engine: i6
Default

Originally Posted by ehracing67

IRO's adjustable track bar uses your factory mount and a tie rod type end. The length is still adjustable. The double shear is also adjustable but uses a different frame mount to achieve the "double shear" or through bolt design.
I have a Kevin's offroad track bar got one with the IRO's kit I got but got rid of it to one of my buddy but it worth the investment found my track bar on Craigslist ill check around my area to c if I can found one
Reply
Old Apr 4, 2013 | 12:50 AM
  #5339  
bobsxj's Avatar
Member
 
Joined: Feb 2013
Posts: 238
Likes: 0
From: Quakertown, PA
Year: 1999
Model: Cherokee
Engine: 4.0 Inline 6
Default

Originally Posted by xLxDIZZYx

I have a Kevin's offroad track bar got one with the IRO's kit I got but got rid of it to one of my buddy but it worth the investment found my track bar on Craigslist ill check around my area to c if I can found one
Thanks man.
Reply
Old Apr 4, 2013 | 02:16 AM
  #5340  
bobsxj's Avatar
Member
 
Joined: Feb 2013
Posts: 238
Likes: 0
From: Quakertown, PA
Year: 1999
Model: Cherokee
Engine: 4.0 Inline 6
Default

How is IRO? Do they ship fast?
Reply



All times are GMT -5. The time now is 06:52 PM.