Maryland Cherokee Club
CF Veteran
Joined: Feb 2012
Posts: 6,468
Likes: 18
From: Forest Hill, Maryland
Year: 1998
Model: Cherokee
Engine: 4.0L
Did an oil change on the Jeep at work. Was told surprisingly the RMS was not leaking. Considering 232,000 miles i'm pretty happy, but I do need to do the valve cover though.
Also I'm going to have a big paycheck coming up. Going to order the IRO DS TB, and set aside a good bit of money for new tires. Might get a set of fog lights too depending on how much I get.
Also I'm going to have a big paycheck coming up. Going to order the IRO DS TB, and set aside a good bit of money for new tires. Might get a set of fog lights too depending on how much I get.
CF Veteran
Joined: Aug 2011
Posts: 4,323
Likes: 0
From: New Market
Year: 1998
Model: Cherokee
Engine: 4.0L I6
yup stripped the torx hole I did what a guide a found said to ran jeep for like 30 min so its hot and do it nope still no luck for me.
I found someone else that had same problem they used a pipe wrench on the end so I guess ill be trying that now or vise grips... started this at 1pm its now 4:15 for 1 damn bolt this is sad sad lmao.
ill heat it up with a small torch and use pipewrench and see what happens i guess.
Seasoned Member
Joined: Dec 2012
Posts: 289
Likes: 0
From: Brooklyn park MD
Year: 2000
Model: Cherokee
Engine: 4.0l
CF Veteran
Joined: Aug 2011
Posts: 4,323
Likes: 0
From: New Market
Year: 1998
Model: Cherokee
Engine: 4.0L I6
My shop can do it if you want. I'm in reisterstown. Not sure where you are.
CF Veteran
Joined: Aug 2011
Posts: 1,035
Likes: 0
From: Mt. Rainier, MD
Year: 1999
Model: Cherokee
Engine: 4.0
I recently picked up a project at work overhauling some very large exhaust fans that have been out of commission for over 30 years. Today I went into one of the rooms that serves as the plenum to install some lighting for us to work by and happened to catch a newspaper on the floor with my flashlight. Coincidentally (and ****ing weird), it was dated August 16,1986.
The Yugo
ad is what caught my eye and caused me to pick it up.
The Yugo
ad is what caught my eye and caused me to pick it up.
Last edited by wormdrink; Aug 16, 2013 at 08:36 PM.
Seasoned Member
Joined: Dec 2012
Posts: 289
Likes: 0
From: Brooklyn park MD
Year: 2000
Model: Cherokee
Engine: 4.0l
CF Veteran
Joined: Aug 2011
Posts: 1,035
Likes: 0
From: Mt. Rainier, MD
Year: 1999
Model: Cherokee
Engine: 4.0
Seasoned Member
Joined: Dec 2012
Posts: 289
Likes: 0
From: Brooklyn park MD
Year: 2000
Model: Cherokee
Engine: 4.0l
CF Veteran
Joined: Feb 2012
Posts: 5,153
Likes: 0
From: Crofton, MD
Year: 1992
Model: Cherokee
Engine: 4.0 I6, 62mm BBK Throttle Body w/ 1" Spacer, Rusty's Airtube w/ 9" K&N Conical
I recently picked up a project at work overhauling some very large exhaust fans that have been out of commission for over 30 years. Today I went into one of the rooms that serves as the plenum to install some lighting for us to work by and happened to catch a newspaper on the floor with my flashlight. Coincidentally (and ****ing weird), it was dated August 16,1986.
The Yugo
ad is what caught my eye and caused me to pick it up.
The Yugo
ad is what caught my eye and caused me to pick it up.

