Maryland Cherokee Club

Reply Subscribe

Thread Tools

Search this Thread

Feb 14, 2012 | 12:08 PM

#8146

DocOrng XJ

Senior Member

Joined: Dec 2010

Posts: 903

Likes: 1

From: Linthicum, Md

Year: 1987

Model: Cherokee

Engine: 1987 4.0L (242 CID) I6 RENIX FI 242 173 hp (129 kW) @ 4600 rpm, 224 lb•ft (304 N-m) @ 4000RPM

Quote:

Originally Posted by NewKindOfClown

I'm an instigator; not an idiot

I wasn't even stock. I was -3.5" in the back, and I have crushed rockers to prove I did too much that day

And still, you were the last one up, and you didn't tell us you were taking a different route.

i mentioned your negative arch

every time we stopped i told you what route i was planning on taking
and then when we came back thru 2x or 3x in the same area, you still took the same "easy" route

Feb 14, 2012 | 12:18 PM

#8147

cgarrett

Senior Member

Joined: Dec 2011

Posts: 500

Likes: 0

From: MoCo, Maryland

Year: 1994

Model: Cherokee

Quote:

Originally Posted by 96xjclassic

Not to stir anything up, here doc.

its an Oldie but a goodie.

Was this at the hagerstown off road park?

Feb 14, 2012 | 12:29 PM

#8148

Pudgy Fingers

CF Veteran

Joined: Aug 2011

Posts: 4,323

Likes: 0

From: New Market

Year: 1998

Model: Cherokee

Engine: 4.0L I6

Quote:

Originally Posted by cgarrett

Was this at the hagerstown off road park?

Yes.

Feb 14, 2012 | 12:31 PM

#8149

Pudgy Fingers

CF Veteran

Joined: Aug 2011

Posts: 4,323

Likes: 0

From: New Market

Year: 1998

Model: Cherokee

Engine: 4.0L I6

Quote:

Originally Posted by DocOrng XJ

i mentioned your negative arch

every time we stopped i told you what route i was planning on taking
and then when we came back thru 2x or 3x in the same area, you still took the same "easy" route

If I recall correctly I was already up the hill. Then you decided to try this route. I would have done it but I was already past it. And you STILL can't hold a camera steady. Lol.

Feb 14, 2012 | 12:31 PM

#8150

96xjclassic

CF Veteran

Joined: Dec 2010

Posts: 6,880

Likes: 0

From: Frederick, Maryland

Year: 1996

Model: Cherokee

Engine: 4.0 I-6 High output

I sure hope they do it again this year. Sounds like a few guys have something to prove!!

Feb 14, 2012 | 12:34 PM

#8151

cgarrett

Senior Member

Joined: Dec 2011

Posts: 500

Likes: 0

From: MoCo, Maryland

Year: 1994

Model: Cherokee

I went to the hagerstown park but i didnt take my jeep. i went with my brother and he took his.

Feb 14, 2012 | 12:38 PM

#8152

cgarrett

Senior Member

Joined: Dec 2011

Posts: 500

Likes: 0

From: MoCo, Maryland

Year: 1994

Model: Cherokee

i just went back through some of the picture i took that day and found this. the maroon is my brother and im pretty sure the other two are newkindofclown and 96xjclassic

Feb 14, 2012 | 12:42 PM

#8153

Pudgy Fingers

CF Veteran

Joined: Aug 2011

Posts: 4,323

Likes: 0

From: New Market

Year: 1998

Model: Cherokee

Engine: 4.0L I6

Quote:

Originally Posted by cgarrett

i just went back through some of the picture i took that day and found this. the maroon is my brother and im pretty sure the other two are newkindofclown and 96xjclassic

I remember your brothers rig. I got there a little later than clown and classic.

Feb 14, 2012 | 12:42 PM

#8154

96xjclassic

CF Veteran

Joined: Dec 2010

Posts: 6,880

Likes: 0

From: Frederick, Maryland

Year: 1996

Model: Cherokee

Engine: 4.0 I-6 High output

Yep, that be us.

Feb 14, 2012 | 12:44 PM

#8155

cgarrett

Senior Member

Joined: Dec 2011

Posts: 500

Likes: 0

From: MoCo, Maryland

Year: 1994

Model: Cherokee

yeah, he broke a u joint at the end of his first time around. he got caught up on a rock in the cemetery

Feb 14, 2012 | 12:46 PM

#8156

DocOrng XJ

Senior Member

Joined: Dec 2010

Posts: 903

Likes: 1

From: Linthicum, Md

Year: 1987

Model: Cherokee

Engine: 1987 4.0L (242 CID) I6 RENIX FI 242 173 hp (129 kW) @ 4600 rpm, 224 lb•ft (304 N-m) @ 4000RPM

I hope they do it again too, was alot of good clean fun.

Sounds like the only way to settle this is a "wheel off"

Which means we have to take off work & go wheelin, darn... lol

Feb 14, 2012 | 12:58 PM

#8157

pulltabmike

CF Veteran

Joined: Jul 2011

Posts: 3,235

Likes: 2

From: Elkton, Maryland

Year: 1998

Model: Grand Cherokee

Engine: 4.0

Quote:

Originally Posted by Pudgy Fingers

If I recall correctly I was already up the hill. Then you decided to try this route. I would have done it but I was already past it. And you STILL can't hold a camera steady. Lol.

Feb 14, 2012 | 01:09 PM

#8158

Veeb0rg

::CF Moderator::

Joined: Sep 2009

Posts: 3,495

Likes: 482

From: Glen Burnie, MD

Year: 2001

Model: Cherokee (XJ)

Engine: 4.0l

need to get 4 "donut" spare tires and make someone go wheeling using them. see how really skilled they are.

Feb 14, 2012 | 01:12 PM

#8159

pulltabmike

CF Veteran

Joined: Jul 2011

Posts: 3,235

Likes: 2

From: Elkton, Maryland

Year: 1998

Model: Grand Cherokee

Engine: 4.0

Quote:

Originally Posted by Veeb0rg

need to get 4 "donut" spare tires and make someone go wheeling using them. see how really skilled they are.

I'm game

Feb 14, 2012 | 01:32 PM

#8160

dukie564

☠ CF Sheriff ☠

Joined: Nov 2009

Posts: 15,197

Likes: 18

From: Aberdeen, MD

Year: 1995

Model: Cherokee

Engine: 4.0L HO I-6, 703 Injectors, Brown Dog Super Engine Mounts

Quote:

Originally Posted by brian0128

I'm in for RC if I can get my bump stops for the rear. I need a place to disconnect my sway bar and flex it out to take measurements.

Brian I got a perfect place next time you're by me.