Do it

 

Show me...I have tried

I want 1.5" in and out with an m22x1.5 port....

 

I called Saab and he had no idea what I was talking about. He was supposed to fax me a diagram. Does this mean I can stop looking?

 

How am I supposed to measure these bushings for my sway bar? Measure the bar itself or..

 

So after doing muffler headers injector swap and all cleaning intake and so on i picked up like 1 mpg getting 11.2-11.5. Still think somethings up i know its gotta go through the 50 warm up cycles. But most people I see with around the same lift and tires wise and all are getting like 15-16 im lost lol.
any tips on what to look at?

 

yea measure the bar. I used calipers but you could use an adjustable wrench also

 

Yeah...thanks....

Response from Dirtbound:

"The T started as a 1/2" NPT, so any 1/2" NPT fitting from the hardware store will work. We then machine the one port and re tap it to M22x1.5.
I can sell just the T for $15 plus $5 shipping.
Max Wilson

DirtBound Offroad
Lead Product Designer
O: (909) 599-4847
www.DirtBoundUSA.com "

 

measure the bar with micrometer

 

painting my new LCAs. And now its pouring down rain.

 

I'm getting 15-16.5 on 5.5" and 32s. 3.55 gears. Mostly highway for me though.

 

i do a mix i got 4.5 on 32s not sure what im gearing is though

 

Don't have an adjustable large enough nor do I have a micrometer

 

advanced auto has em for like a few bucks i got some from there when i did mine they were 48 cent lol

 

wrap string around it. and mark w/ a pen/sharpie, whatever. measure from the end of the string to the mark you made on the string to get circumference. divide by pi (3.14159) and that gets you diameter.

 

There might be a tag on the diff cover. Clean off and it will tell you or request a build sheet online.