I got my jeep back finally.. had to replace the hardline from the prop valve, the rear brake hose and both hardlines on the axle.

ugh

And to think, it all started with getting my retreads finally mounted.

 

good for the next 200,000 miles

 

Still need to change the front hardlines, they don't leak but they're rusted to the softlines. I should be able to get the prebent ones from the dealer.

 

So you're saying retreads are the root of all evil?
Kidding!! I almost bought some.

 

well, I took it to my buddies dealer, we put my jeep up on the lift got the tires off and then noticed the rear line leaking. its been a heck of an ordeal.

 

atleast you didnt find out about it the hard way... 65+ mph on the highway...

 

So I ordered a new track bar bolt to replace the one Justin and I broke the other night. Long story short I put on the new lower control arms in about an hour then decided to put the new track bar bolt in. I set the torque wrench to 60ft/lbs even though the manual says 74. I was tightening it up and sure enough I snapped it.

I'm going to have to use the grade 5 bolt again.

 

dude - just get a new one from the hardware store (lowes or ace) so you KNOW it's grade 8. The grade 8 ones will always have the gold colored zinc coating on them, and the 5 hash marks on the head.

 

http://fredericksburg.craigslist.org...797164606.html

 

32s. Anyone need some 31s?

 

Nice!! Are you able to stuff them into the wheel wells?

 

i like your jeep...were almost twins...i guess i could be your big brother...

 

Yeah since I trimmed them.

 

You mean like for free? Lol

Too far of a drive for me

 

What do u want for them and what kind