Maryland Cherokee Club
)
CF Veteran
Joined: Aug 2011
Posts: 4,323
Likes: 0
From: New Market
Year: 1998
Model: Cherokee
Engine: 4.0L I6
Originally Posted by 94cherokeeman
Ok someone help I was taking another stab at the locker I got from mike can someone tell my y the center shaft is smaller then the stock one
CF Veteran
Joined: May 2011
Posts: 3,380
Likes: 0
From: Partlow, va
Year: 1994
Model: Cherokee
Engine: 4.0 i6, 307 injectors
Originally Posted by Pudgy Fingers
I'll just take it off your hands. You don't need a locker in the rear anyways.
CF Veteran
Joined: Oct 2009
Posts: 2,300
Likes: 0
From: Alaska
Model: Cherokee
Seasoned Member
Joined: Dec 2010
Posts: 358
Likes: 0
From: Stevensville, Maryland
Year: 1994
Model: Cherokee
Engine: 4.0L
Not completely. Im getting a new rear axel tomorrow and putting it in on sunday. Im about 10 minutes away from ordering http://www.napierprecisionproducts.c...k-V2-B-2DR.htm i believe
Also MOO once again. I want your roof rack
Also MOO once again. I want your roof rack
CF Veteran
Joined: Mar 2009
Posts: 7,996
Likes: 0
From: Berea, OH
Year: 1998
Model: Cherokee
Engine: 4.0
Found a 4:10 8.8 for $100, and gears for the D30 for $30....
SCHWEET!! The new project will go well...
Keep a lookout for me...here is the good part. The kid only came up with $1300 for mine, so I kept ALL my parts EXCEPT the lift springs and shocks, ALL OF THEM....
So keep a look out for me...I need 3" springs all the way around.
In a week I am also picking up BFG MT 33", 4 at 50% tread for $150.
So...new axle and gears...I have my turbines...getting tires, have a Jeep....
Just need the springs and it is ON LIKE DONKEY KONG!!!!
I made out so well today I can almost pinch myself to make sure I am not dreaming...
Best part....I am driving the kid to his house in my old Jeep (he gave me a ride to my new one) and the caliper I just rebuilt smoked again
....lol...I am going to go help him fix it tomorrow...I'm a nice guy like that.
Good to be working again! It's ON!
SCHWEET!! The new project will go well...
Keep a lookout for me...here is the good part. The kid only came up with $1300 for mine, so I kept ALL my parts EXCEPT the lift springs and shocks, ALL OF THEM....
So keep a look out for me...I need 3" springs all the way around.
In a week I am also picking up BFG MT 33", 4 at 50% tread for $150.
So...new axle and gears...I have my turbines...getting tires, have a Jeep....
Just need the springs and it is ON LIKE DONKEY KONG!!!!
I made out so well today I can almost pinch myself to make sure I am not dreaming...
Best part....I am driving the kid to his house in my old Jeep (he gave me a ride to my new one) and the caliper I just rebuilt smoked again
....lol...I am going to go help him fix it tomorrow...I'm a nice guy like that.Good to be working again! It's ON!
