Maryland Cherokee Club
CF Veteran
Joined: Feb 2012
Posts: 2,961
Likes: 0
From: Sykesville, Md
Year: 2000
Model: Cherokee
Engine: 4.0
I wouldnt mind that, I may end up having to fab one for my sister's ZJ. She likes mowing down deer with hers and I am getting tired of painting the factory plastic bumper cover. It is also getting expensive for my parents since they are around 400 a pop.
CF Veteran
Joined: May 2011
Posts: 3,380
Likes: 0
From: Partlow, va
Year: 1994
Model: Cherokee
Engine: 4.0 i6, 307 injectors
Originally Posted by NewKindOfClown
The overheating problem? First time I over heated was Monday after wheeling at Frosty's. I thought it was a clogged radiator, so I sprayed it out at a car wash. I was good for a few days, but I overheated again Saturday on my way to Virginia. My belt had been squealing a little since Sunday night, though, and it got real bad Saturday night when I pulled up to Classic's house. Popped the hood and found that pulley had broken off. I think the loose pulley had something to do with it, cause my fan had some play in it before, and I don't think it was spinning properly. Replaced the pulley, everything was good. Then last night, the new pulley bent for an unknown reason, and the belt was shredded. Pulley #3 and belt #2 are on there now, and I'm about to go adjust the tension. The sun was down by the time I got the pulley back on last night, and there were ~45mph winds that made working in a parking lot suck.
CF Veteran
Joined: Jul 2011
Posts: 3,235
Likes: 2
From: Elkton, Maryland
Year: 1998
Model: Grand Cherokee
Engine: 4.0
The overheating problem? First time I over heated was Monday after wheeling at Frosty's. I thought it was a clogged radiator, so I sprayed it out at a car wash. I was good for a few days, but I overheated again Saturday on my way to Virginia. My belt had been squealing a little since Sunday night, though, and it got real bad Saturday night when I pulled up to Classic's house. Popped the hood and found that pulley had broken off. I think the loose pulley had something to do with it, cause my fan had some play in it before, and I don't think it was spinning properly. Replaced the pulley, everything was good. Then last night, the new pulley bent for an unknown reason, and the belt was shredded. Pulley #3 and belt #2 are on there now, and I'm about to go adjust the tension. The sun was down by the time I got the pulley back on last night, and there were ~45mph winds that made working in a parking lot suck.
CF Veteran
Joined: Feb 2012
Posts: 5,153
Likes: 0
From: Crofton, MD
Year: 1992
Model: Cherokee
Engine: 4.0 I6, 62mm BBK Throttle Body w/ 1" Spacer, Rusty's Airtube w/ 9" K&N Conical
CF Veteran
Joined: Jul 2011
Posts: 3,235
Likes: 2
From: Elkton, Maryland
Year: 1998
Model: Grand Cherokee
Engine: 4.0
CF Veteran
Joined: Feb 2012
Posts: 2,961
Likes: 0
From: Sykesville, Md
Year: 2000
Model: Cherokee
Engine: 4.0
They will have plenty of time to film episodes when they are living in a van down by the river
I miss Farley
CF Veteran
Joined: Feb 2012
Posts: 5,153
Likes: 0
From: Crofton, MD
Year: 1992
Model: Cherokee
Engine: 4.0 I6, 62mm BBK Throttle Body w/ 1" Spacer, Rusty's Airtube w/ 9" K&N Conical
CF Veteran
Joined: Feb 2012
Posts: 2,574
Likes: 0
From: Laurel, MD
Year: 1998
Model: Cherokee
Engine: 4.0L
CF Veteran
Joined: Feb 2012
Posts: 5,153
Likes: 0
From: Crofton, MD
Year: 1992
Model: Cherokee
Engine: 4.0 I6, 62mm BBK Throttle Body w/ 1" Spacer, Rusty's Airtube w/ 9" K&N Conical
