Jersey pride , show ur ride
#1771
Member
Join Date: Feb 2013
Location: Kingwod,NJ
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Finally got cowl good painted and done... It's not straight... Mostly because I got distracted ad didn't wanna finish haha first time using plastidip too .... F***ing love it haha
#1772
Member
Join Date: Aug 2012
Location: South Jersey
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: 4.0L Straight 6
#1773
Member
Join Date: Feb 2013
Location: Kingwod,NJ
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
#1775
Member
Join Date: Aug 2012
Location: South Jersey
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: 4.0L Straight 6
So far the injector swap has been somewhat successful. The cold start is faster, idle is smoother, and throttle response is also better. However, it did not solve my problem of the "ghost sputter" where it will randomly decide to almost die after start up.
#1776
Newbie
Join Date: Aug 2013
Location: mantua, nj
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0l
mantua, south jersey here..... dont know how to upload pics yet...2000 red cherokee sport...3 1/2 zone lift, brand new 31x10.5 bfg all terrain ......getting magnaflow cat back this weekend, needs new throttle body and spacer as well as injectors...and suggestions?
#1777
#1778
So, in the mission for the best flex with my lift, the first problem I ran into a few weeks ago was limiting rear shocks. I sort of expected it because I put stock JK shocks all around. I replaced them with superlift shocks. Got a great deal on them, and the ride quality on/off road is noticeably different. It also took away my death wobble issues...
Now for the current dilemma: my backspacing
I put small 5/16in spaces up front to keep from rubbing and the same spaces would not fit in the rear(wheel studs were too short). When flexed out like this the limiting factor was not fender rub, but the passenger side rear tire being pushed against the leaf spring.
so, obviously if I want to continue to use a 12.5 wide tire, I need new wheels...
Does anyone have a set/ have a friend with a set/ recommend a set? I need a 15in wheel that has a decent backspacing. I'm tired of all of the rub.
Now for the current dilemma: my backspacing
I put small 5/16in spaces up front to keep from rubbing and the same spaces would not fit in the rear(wheel studs were too short). When flexed out like this the limiting factor was not fender rub, but the passenger side rear tire being pushed against the leaf spring.
so, obviously if I want to continue to use a 12.5 wide tire, I need new wheels...
Does anyone have a set/ have a friend with a set/ recommend a set? I need a 15in wheel that has a decent backspacing. I'm tired of all of the rub.
#1779
Member
Join Date: Aug 2012
Location: South Jersey
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: 4.0L Straight 6
For the throttlebody, buy a bored one from strokedjeep. Forget the spacer, they don't do anything. As far as injectors, buy some rebuilt ones from eBay, there are a ton of reputable dealers
#1780
Member
Join Date: Aug 2012
Location: South Jersey
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: 4.0L Straight 6
So, in the mission for the best flex with my lift, the first problem I ran into a few weeks ago was limiting rear shocks. I sort of expected it because I put stock JK shocks all around. I replaced them with superlift shocks. Got a great deal on them, and the ride quality on/off road is noticeably different. It also took away my death wobble issues...
Now for the current dilemma: my backspacing
I put small 5/16in spaces up front to keep from rubbing and the same spaces would not fit in the rear(wheel studs were too short). When flexed out like this the limiting factor was not fender rub, but the passenger side rear tire being pushed against the leaf spring.
so, obviously if I want to continue to use a 12.5 wide tire, I need new wheels...
Does anyone have a set/ have a friend with a set/ recommend a set? I need a 15in wheel that has a decent backspacing. I'm tired of all of the rub.
Now for the current dilemma: my backspacing
I put small 5/16in spaces up front to keep from rubbing and the same spaces would not fit in the rear(wheel studs were too short). When flexed out like this the limiting factor was not fender rub, but the passenger side rear tire being pushed against the leaf spring.
so, obviously if I want to continue to use a 12.5 wide tire, I need new wheels...
Does anyone have a set/ have a friend with a set/ recommend a set? I need a 15in wheel that has a decent backspacing. I'm tired of all of the rub.
Last edited by puckhound95; 08-15-2013 at 10:54 PM.
#1781
#1782
Member
Join Date: Aug 2012
Location: South Jersey
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: 4.0L Straight 6
Anyone recommend a place to get my windows tinted? Car Toyz uses 3M stuff and so does JC Motorsports. One Stop uses Viper tint which has a lifetime warranty and they gave me the best price
#1785
Newbie
Join Date: Jul 2012
Location: a.c.n.j.
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Grand Cherokee
Engine: i6
ok guys my zj wants to sputter and die everytime it gets to 185/190 on the temp gauge anything before or after it runs/idles fine ? any ideas ?? I`ve cleaned the throttle body and iac