1992JeepCherokee4x4

Hi Folks,
What brand of tape should i use to tape the following emblems, and where would I get it? :

1. Chrome JEEP Emblem on the front of the truck (Looks like each letter is individually taped)

and

2. The "High Output 4.0 Liter" Embllem on the back hatchback


Thanks for your help

lliamsdad

Some 3m double aided tape maybe. You can get that emblem glue also at any parts house.

SRT-10Jeep

Got to your local body shop and ask what they use. They will usually give you some.

1992JeepCherokee4x4

any suggestions on mounting the "Jeep" letters on the front hood? as they are all indivual letters. Whats the best way to do this?
I want to make sure its perfectly straight and even etc.
Thanks so much for the help folks

JerseyJeeper

Went to pep boys and picked up some of the 3M double sided adhesive and that worked great for my emblems. I recently had to switch out a cracked header panel with a new one and didnt want to go "badge-less". Works great for me. I used the thin cut so that it fit onto the letters. I just cut the pieces to fit the same, lined em up and that was it. It was pretty easy to do, just make sure you don't do it when it's too hot because the glue on the foam needs time to dry onto the panel.