South Florida Dysfunctional 4x4's
Member
Joined: Jan 2017
Posts: 228
Likes: 0
From: Fort Lauderdale FL
Year: 1996
Model: Cherokee(XJ)
Engine: 4.0
hey guys, so ive been busy a little bit. Cherokees up 3inches, jkur hard rock shocks are awesome, and i think they are perfectly valved for the Cherokees weight anyways. i installed a fan switch, so now i got full manual control of my fan now which is awesome for offroading. A/C works found that out. the bad is i need shackle relocation brackets in the rear, i dont like the shackle angle. still need new track bar, snorkle, new lowercontrol arm bushing for the rough country fixed control arms. ummm still need to patch a few holes and bedline floor boards. i want to go to 33s now. just a list of stuff. it never ends.
Also need to test if the voltage regulator is actually bad in the pcm. so i can go back to the factory voltage regulator.
Also need to test if the voltage regulator is actually bad in the pcm. so i can go back to the factory voltage regulator.
CF Veteran
Joined: Oct 2013
Posts: 7,378
Likes: 2
From: Miami, fl
Year: 1998
Model: Cherokee
Engine: 4.0
Good morning fellas
Cavfab 3-link is on the xj still gotta adjust the arms
Gotta do the water pump and new thermostat housing this week so I can drive it to do upgrades on the Comanche already...
Wife has been crying about parts around the house lol
Cavfab 3-link is on the xj still gotta adjust the arms
Gotta do the water pump and new thermostat housing this week so I can drive it to do upgrades on the Comanche already...
Wife has been crying about parts around the house lol
Junior Member
Joined: May 2018
Posts: 37
Likes: 0
From: Naples, Florida
Year: 1997
Model: Cherokee (XJ)
Engine: 4.0
Junior Member
Joined: May 2018
Posts: 37
Likes: 0
From: Naples, Florida
Year: 1997
Model: Cherokee (XJ)
Engine: 4.0
Been going through some water lately due to heavy rains and my love of offroading now I'm getting a squeak from the drive shaft... It lessens when I let off the gas.. Maybe a universal joint or unit bearing? Any suggestions on how to pin point it by myself? Thanks... Hope everyone had a safe weekend
CF Veteran
Joined: Oct 2013
Posts: 7,378
Likes: 2
From: Miami, fl
Year: 1998
Model: Cherokee
Engine: 4.0
Been going through some water lately due to heavy rains and my love of offroading now I'm getting a squeak from the drive shaft... It lessens when I let off the gas.. Maybe a universal joint or unit bearing? Any suggestions on how to pin point it by myself? Thanks... Hope everyone had a safe weekend
CF Veteran
Joined: Oct 2013
Posts: 7,378
Likes: 2
From: Miami, fl
Year: 1998
Model: Cherokee
Engine: 4.0
I think your centering ball might be worn out...
You can replace them
https://m.ebay.com/itm/JEEP-Drivesha...IAAOSwDPNbDICW
You can replace them
https://m.ebay.com/itm/JEEP-Drivesha...IAAOSwDPNbDICW
Newbie
Joined: May 2018
Posts: 5
Likes: 0
Model: Cherokee (XJ)
Last edited by Ihasmiata?; Jun 14, 2018 at 05:45 AM.
CF ADMIN
Joined: Sep 2010
Posts: 34,088
Likes: 257
From: Lantana, Fl
Year: 1996
Model: Cherokee (XJ)
Engine: 4.Slow
Junior Member
Joined: May 2018
Posts: 37
Likes: 0
From: Naples, Florida
Year: 1997
Model: Cherokee (XJ)
Engine: 4.0
I think your centering ball might be worn out...
You can replace them
https://m.ebay.com/itm/JEEP-Drivesha...IAAOSwDPNbDICW
You can replace them
https://m.ebay.com/itm/JEEP-Drivesha...IAAOSwDPNbDICW
Junior Member
Joined: May 2018
Posts: 37
Likes: 0
From: Naples, Florida
Year: 1997
Model: Cherokee (XJ)
Engine: 4.0
