When is it again ?

 

Apr 25-29. I'm going up on Sat the 28th for the day to meet n greet our members and Vendors. Last year I went to dinner with a few of the vendors.

 

Thought you HATED the "HO" electronics.

This guy

 

The 4.0L version I don't like. I yanked all this from a YJ. Far less wiring than the XJ as well. Won't gain me any power, just you can't get a few parts for the MJ engine anymore so time to update it some. I can't buy the rotor for the distributor anymore. Morris 4x4 has it but not regular parts stores for example.

 

Good morning guys.

 

Good evening sir. Got the last few parts for my WJ Pump upgrade today should be finished Saturday with luck.

 

Well I put a new water pump and 195 tstat in last weekend. Runs fine. Still don't know if the old water pump was shot or not. Of I it just developed a leak around the flange or housing. But it didn't look that old. And the blades where still good on it. But new pump seems to work fine. I guess it runs a little cooler. But now I might as well put a new zj clutch fan on it next weekend. And then the whole cooling system would be completely new.

 

Hey Gary, how much of that vac line do you need and what diameter? I have a few rolls at my shop.

 

Huh ?

 

Didn't you ask for A/C & heater vac lines for an XJ on a Part Out thread?

 

Looking for supply flex tube to dash vent. That blows cold air out. Could use a renix 4.0 valve cover for cruisers mod.

 

Steering upgrade works great....https://www.cherokeeforum.com/f67/wj...-renix-242571/

 

I might have that for you. Which side do you need?

 

Dont matter its flexable and its for the vent under steering wheel. So gonna be cutting down.

 

Yeah, I have that one. It's about a foot long. I don't have AC but had all that stuff I removed from my MJ.