Picked up a 4.10 geared 8.8 with disk brakes today

 

You got a 410 front already ?

 

Not yet, there was one at the yard but the front end was sitting in a 6" deep puddle. Plus I ran out of time

 

Davie ? Battery sawz all gets them out quick don't forget rubber boots

 

What Front had 4.10

 

One of the junkyards up in West Palm on Southern Blvd. I'm thinking I may just regear my current dana 30 to match. We have all the tools at work that I can borrow, should cost be about the same and be a good learning experience.

 

93 4 cylinder 5 speed, I would pull the cover before removing it, but from what I understand that setup should have 4.10s

 

Junk yard axle is around $130ish, gears cost more then that & it's a ***** to set gears

 

99 percent off 4cyl xjs do...that's where mine came from.

 

With buying extra axle you get spare parts, gears allready set and done in a few hours....Think about it

 

Sounds like a plan...for sure I'm going to have to get some 4.10 gears for my automatic I know 4.56 gears would be more ideal for an automatic but 4.10s are easy to grab than to regear...

 

Price is what I was concerned about, which is why I wanted to get the junkyard axle. However, a full axle, rotor to rotor is about 250 at that yard in west palm (ABC u pull it). They're much cheaper at u pull it on 441, but I haven't even seen a cherokee in that yard in the last few months and especially not a 92-99 4 cly 4wd.

 

I have to agree that spare parts are nice though

 

Tire Shopping sucks. Anyone have any go-to shops with good deals in the greater Miami area? I'm looking for some 31x10.5r15s.

 

& you can tinker on the spare axle without your jeep being down