You guys be careful with this weather heading your way. We are still getting pounded here.... been under 2 tornado warnings in the past hour. Bout to go batten down the hatches again.

 

If anyone has a lead on a 15/39.5x15 TSL in the Southeast let me know, need a decent spare before the trek out to KOH at the end of the month.
Tx Mark

 

I don't know of anyone with that size other than you. I need to figure out what ram to run for my assist.

 

What size tires did you end up going with?


I worked out a deal on most of the material to build my tubing bender. I'll have one soon, damnit!

 

Top secret information. I'm too excited to spill the beans.

I got 4 awesome tires for less than my SX's would have been.

 

I want to see pics of the drivers side coil bucket... thats the hard part i think... most run coilover or oris to the top of the inner C.. txt them to me so i can blow them up or keep them... i get a ton of super duty questions...

 

It fits

 

Whats it welded to though? The lower control arm?? When i did it on the XJ i drilled a hole in the old oem bump stop flat spot and where it was hollow i fit a nut and bolted it down with a grade 8 bolt... worked fine and cheap... fab wise i was wonderin

 

Gottem... sweet!

Kinda wish i had done differently... looks so much easier and better lol... but mine works so cant complain...

 

Sucks xause nobody was buildkng them when i had mine lol... i had limited resources... all i could find was they were balljoint and not to use them because of that... which was total pirate BS...

 

I haven't seen anyone do this with an 05+ yet, just a 99-04. I wanted to keep the inner C intact for CO's or ORI's one day.

 

Finally finished building a trailer/smoker for my neighbor for big $$ so I can finally purchase the $700 worth of brake parts for my jeep. Yaaaaaay. Also someone buy my axles/wheels/tires :P

 

You should buy my H1's for your new axles.

Wheels, rock rings already welded on, PVC inserts, and pressed 8x170 centers. From TWF they're $300 each plus shipping set up like that, I want $650 for all 4.

 

Synthetic winch line?? Are yall using it, if so where's the best deal?

 

Not sure about the best deal, but only synthetic line for me, and only amsteel blue.