What kind of bump stops are you guys running, and sizes?

 

Hockey pucks. I'm going to need to make rear bump stops when I get 35's.

 

The ones I made work great! I used the 4" rubber up top in the stock location and bump plate welded to the top leaf spring retainer plate.

 

I think that will work, but I'll need to measure. You just butt welded a piece to the retainer plate?

 

Where do you measure up front?

 

Flex somewhere and measure from the bottom of your bumpstop tower to your coil bucket.

 

I could find hockey pucks local where do yall get them?

 

I couldnt find them local.

 

I bought 25 off of fleabay.

How many do you need?

 

Im not running any bumpstops right now but im going to get relication boxes hopefully and some longer shocks and them measure..all my factory one rotted off.do yall run factory ones up front with pucks?out back im going to make a plate off the spring plate but dont rwally know what stop design to use.

 

How much would you sell 6 for?

 

Ship them for $20 to ya

 

This is similar to what i did. Except i got the already made bump plate

 

That's what I was going to do, but I didn't want the plate to bend at the weld.

 

No,Google such jeep xj bump stop plate or u point plate. It goes in place the u bolt plate and extends out a little.you can attach a lower bumpstop to it.