Any Georgians?
CF Veteran
Joined: Sep 2009
Posts: 6,322
Likes: 6
From: Summerville, Ga
Year: 1995
Model: Cherokee
Engine: 2.5 4 cyl.
Junior Member
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
Go to the dang PaP and quit screwin around!
Ya pay 2 bucks to walk the yard. Worst case you loose 2 bucks and 2 hours of your life.
I enjoy walking around in there anyways.
Ya pay 2 bucks to walk the yard. Worst case you loose 2 bucks and 2 hours of your life.
I enjoy walking around in there anyways.
CF Veteran
Joined: Apr 2011
Posts: 14,553
Likes: 1
From: Carrollton, GA
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
How far is it from you? There isn't a west one so I have to go To the south one. Looks an hour 15 or so from me
CF Veteran
Joined: Sep 2009
Posts: 6,322
Likes: 6
From: Summerville, Ga
Year: 1995
Model: Cherokee
Engine: 2.5 4 cyl.
CF Veteran
Joined: Apr 2011
Posts: 14,553
Likes: 1
From: Carrollton, GA
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
Third thing today that's been politics... Finally back home now and there is a fire truck next door with three of them talking to someone parked in a mustang in the driveway with the medic bag... Wtf
CF Veteran
Joined: Sep 2009
Posts: 6,322
Likes: 6
From: Summerville, Ga
Year: 1995
Model: Cherokee
Engine: 2.5 4 cyl.
That's an average Tuesday for me. I live a 1/4 mile from the fire/ emergency rescue place, in a neighborhood full of the elderly.
CF Veteran
Joined: Apr 2011
Posts: 14,553
Likes: 1
From: Carrollton, GA
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
Need to pull the front shaft, disco shocks, disco track bar, undo all 4 control arms, coil retainer clip, and what else?
Should i take a TRE puller and beat them off of the thing then im done?
Junior Member
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
They left like 10 min ago so i guess all was good... Gonna go to PAP on Friday after i get off at 2 and dick around until they close at 6. Gonna grab driveshafts and front axle... Well try at least.
Need to pull the front shaft, disco shocks, disco track bar, undo all 4 control arms, coil retainer clip, and what else?
Should i take a TRE puller and beat them off of the thing then im done?
Need to pull the front shaft, disco shocks, disco track bar, undo all 4 control arms, coil retainer clip, and what else?
Should i take a TRE puller and beat them off of the thing then im done?
Big *** hammer is fine.
I usually take a huge hammer and pickle fork.
That's all. All of which should be easy.
Verify gear ratio, high pinon, non-disconnect.
Your Jeep has 3.55s?
CF Veteran
Joined: Apr 2011
Posts: 14,553
Likes: 1
From: Carrollton, GA
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
Non disco of course and yes 3:55's. Cut the brake lines with what?
Sounds super easy in theory till i get there and i have no jack haha
CF Veteran
Joined: Apr 2011
Posts: 14,553
Likes: 1
From: Carrollton, GA
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output