Parting out a '96 Jeep Cherokee... (Port Huron,MI)
#1
Newbie
Thread Starter
Join Date: Dec 2009
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Parting out a '96 Jeep Cherokee... (Port Huron,MI)
Hey guys, I'm around Port Huron MI and will start parting out a 1996 Cherokee that is a 2 door, 4.0L, manual transmission, 2wd jeep. Unfortunately, I'm keeping all the drivetrain stuff for myself (I may or may not keep the rear axle), but the body is great shape by Michigan standards (I think it being 2wd maybe it didn't spend a lot of the time rolling around in the salt). The interior is in good shape, if you have specific parts you might want let me know. tadborowski@hotmail.com
#4
CF Veteran
I'm in Lake Port (just north of PH)
I might be interested in the whole thing after you part out the drive line and axles.
I'm looking for a ground up build based on 2 door and doing a V8 swap..
Let me know.. I'll shoot you a PM with my # so we can talk..
I might be interested in the whole thing after you part out the drive line and axles.
I'm looking for a ground up build based on 2 door and doing a V8 swap..
Let me know.. I'll shoot you a PM with my # so we can talk..
#5
Newbie
Thread Starter
Join Date: Dec 2009
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Sounds great, swing by and check it out sometime. I'd also like to know what exactly you want if you do get the body, because I was considering keeping the pedal assembly, master cylinder and clutch master cylinder, possibly gauges, maybe some body wiring, definitely the fuel pump and tank, etc. I will start tearing down the cherokee as soon as I can.
To the first guy who wants a seatbelt assembly, I might be able to help you out with that, it depends on what the guy who wants to buy the whole outfit is looking for.
To the first guy who wants a seatbelt assembly, I might be able to help you out with that, it depends on what the guy who wants to buy the whole outfit is looking for.
#6
CF Veteran
I'll be shooting you a call tomorrow.
I'm basically looking to use the chassis. So all body panels/glass/doors/hatch, most other things I can fab or replace later..
I'm basically looking to use the chassis. So all body panels/glass/doors/hatch, most other things I can fab or replace later..
#7
CF Veteran
Tad nice meeting you today and glad we could come to a deal..
Can't wait to start my project and see your's evolve..
Can't wait to start my project and see your's evolve..
Trending Topics
#8
Newbie
Thread Starter
Join Date: Dec 2009
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Pleasure to meet you as well. Oh, and today I moved the cherokee into the garage and I realized that there is a hole in the side of the block! I'm a little bummed, so if you know where I might find a solid '96 and up engine block, let me know!
#13
Newbie
Thread Starter
Join Date: Dec 2009
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Thread
Thread Starter
Forum
Replies
Last Post
Batman33165
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
08-27-2015 02:20 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)