dan99xj

i dont have right size sleeve

Customizer1000

U have a big deepwell socket?

dan99xj

no not that big

Customizer1000

Where u get the press from? Are the sleeves not deep enough or what?

dan99xj

from friend at work, to big round

Customizer1000

Gotcha, does.he have the.smaller ones?

dan99xj

no, i wish

Customizer1000

Will a deepwell 3/4 go over the stud of the balljoint?

dan99xj

yes but dont i need one bigger than the ball joint for the bottom(stud) side

Customizer1000

it goes on the flat side to push it out downward,

dan99xj

well im off to bed gotto be up at 5am, ill see what i can get done tomorroow

dan99xj

yea but i need a sleeve bigger than ball joint for under side
so it can slide down

dan99xj

i wounder if a fork press would work, something like a pully remover

dan99xj

QUOTE=dan99xj;1691441]i wounder if a fork press would work, something like a pully remover[/QUOTE]
if it would be strong enough

cookrw

Checking my fluids seems to be a good decision. (Warning, super newb question) How? I have only ever done it on vehicles with hex head fill and drain plugs and 90w gear oil. The diff looks like it has a rubber plug!?
Also what fluids go where for the diffs and transfer case?

On another note, I am bringing tent, first aid kit, sleeping bag, and a full size spare. What else should I pack?