MI XJ jeepers
hey guys and gals... im wantin too come up too the lovely state of Michigan possibly during the second or third weekend or july.. was wonderin if there is any good wheelin places i should keep in mind as for a good place too go. if any one could help me out it.d b greatly appreciated. thanx
CF Veteran
Joined: May 2010
Posts: 1,680
Likes: 5
From: Western Michigan
Year: 1993
Model: Grand Cherokee
Engine: 4.0l inline 6
hey guys and gals... im wantin too come up too the lovely state of Michigan possibly during the second or third weekend or july.. was wonderin if there is any good wheelin places i should keep in mind as for a good place too go. if any one could help me out it.d b greatly appreciated. thanx 

heres a listing of some places to wheel at;
Twisted Trails: http://www.twistedtrailsoffroadpark.com/1.html
Rocks and Valley's: http://rocksandvalleys.com/about.html
Bundy Hill: http://www.bundyhilloffroad.com/
Insane Terain: http://www.thecliffsinsaneterrain.com/
Badlands: http://www.badlandsoffroad.com/
Tin cup Springs trail: http://www.dnr.state.mi.us/publicati..._cup_trail.pdf
The Mounds: http://www.geneseecountyparks.org/pages/MoundsORV
Silver lake sand dunes: http://www.silverlakesanddunes.net/
http://www.michigan.gov/dnr/0,1607,7...4760--,00.html
CF Veteran
Joined: May 2010
Posts: 1,680
Likes: 5
From: Western Michigan
Year: 1993
Model: Grand Cherokee
Engine: 4.0l inline 6
Hey; Any chance anyone is available tomorrow (022611)? I got my engine ready to go and tried to get it in (tried a few times) and no go. It seems to be more than a one guy job. If your available I could really use some help dropping this in (bring a buddy if available). I have some beer in case of thirst. Let me know if you can (616) 834-3249
I'm in Holland, MI
I'm in Holland, MI
CF Veteran
Joined: May 2010
Posts: 1,680
Likes: 5
From: Western Michigan
Year: 1993
Model: Grand Cherokee
Engine: 4.0l inline 6
Good news all, 00jeepXJ came over and we spent a cold snowey afternoon outside but we got the engine droped into place. We had some trouble but I'm sure you get that with any engine install. My ironman fab engine mount were a tight fit and it took a little bit of trying but we finaly got it in. Tomorrow I'll get the rest of the bolts in and the other various peices and parts put back on. Then it's on to the wireing hook up, but soon I'll be back to wheeling.


