Northern Utah BS thread
Banned
Joined: Feb 2012
Posts: 1,059
Likes: 0
From: Price ut
Year: 91
Model: Cherokee
Engine: 4.0
Originally Posted by builtnotbought89'
Yep I'd start with a new set of springs. The teeth look good unlike my Aussie after I was done with it! Haha
CF Veteran
Joined: Sep 2010
Posts: 4,968
Likes: 0
From: Salt Lake City, UT
Year: 2000
Model: Cherokee
Engine: 4.0L
As an additional check to be sure that everything has been
installed correctly, use a small ruler, vernier caliper or bladetype
feeler gauge. The distance between the halves of the
LOCK-RIGHT, that is, between the two drivers, should be
about 5/32-inch (.152-inch, or 3,86-mm). The tolerance limits
are between .145-inch (3,68-mm) and .170-inch (4.32-mm). If
this distance is much over .170-inch, either the case is quite
worn or the thrust washers are missing or are too thin and the
problem should be corrected before proceeding further
installed correctly, use a small ruler, vernier caliper or bladetype
feeler gauge. The distance between the halves of the
LOCK-RIGHT, that is, between the two drivers, should be
about 5/32-inch (.152-inch, or 3,86-mm). The tolerance limits
are between .145-inch (3,68-mm) and .170-inch (4.32-mm). If
this distance is much over .170-inch, either the case is quite
worn or the thrust washers are missing or are too thin and the
problem should be corrected before proceeding further
idk what raring my junk is? lol
CF Veteran
Joined: Sep 2010
Posts: 4,968
Likes: 0
From: Salt Lake City, UT
Year: 2000
Model: Cherokee
Engine: 4.0L
I stopped by Home depot last night on my way home... when I came out to my jeep there was some dude laying under it! lol, trying to figure out what axle/lift combo I have... I told him, "people get crushed down there ya know!" lol, he didn't think I was very funny, and had 101 questions lol.
anyone else get weird **** like this from strangers?
anyone else get weird **** like this from strangers?
CF Veteran
Joined: Aug 2009
Posts: 1,535
Likes: 0
From: Eagle Mountain, Utah
Year: 1994
Model: Cherokee
Engine: 4.0
I stopped by Home depot last night on my way home... when I came out to my jeep there was some dude laying under it! lol, trying to figure out what axle/lift combo I have... I told him, "people get crushed down there ya know!" lol, he didn't think I was very funny, and had 101 questions lol.
anyone else get weird **** like this from strangers?
anyone else get weird **** like this from strangers?
First question.. what did it start as? Dude, if you dont know that much, dont even bother with the rest of your stupid @ss questions!
