Northern Utah BS thread
CF Veteran
Joined: Sep 2010
Posts: 4,968
Likes: 0
From: Salt Lake City, UT
Year: 2000
Model: Cherokee
Engine: 4.0L
Or be cheaper all around, sell the XJ D44, buy a pair of waggy axles (mine where 100 for the pair) and go from there. gears, brackets, shafts, brakes ect to build them will cost the same. Or run the 30 till it breaks and shows its self as a problem. then worry about it...
CF Veteran
Joined: Sep 2010
Posts: 4,968
Likes: 0
From: Salt Lake City, UT
Year: 2000
Model: Cherokee
Engine: 4.0L
Its mud flap time! Got pulled over for a "tail light and license plate light" violation, had my car searched, found I didn't have mud flaps, lights work just fine... I guess I'll get off my butt and finally make them...
CF Veteran
Joined: Sep 2010
Posts: 4,968
Likes: 0
From: Salt Lake City, UT
Year: 2000
Model: Cherokee
Engine: 4.0L
CF Veteran
Joined: Sep 2010
Posts: 4,968
Likes: 0
From: Salt Lake City, UT
Year: 2000
Model: Cherokee
Engine: 4.0L
good points.... well, all day I have been thinking about this and have planed 4 setups lol, now there all a wash, Derek sell me your doubler setup so I can move on lol
Last edited by Gorillaxj; Feb 27, 2012 at 11:33 PM.
CF Veteran
Joined: Sep 2010
Posts: 1,930
Likes: 0
From: herriman
Year: 1991
Model: Cherokee
Engine: 4.0
CF Veteran
Joined: Jan 2009
Posts: 1,703
Likes: 0
From: Utardiland
Year: whats left of a 91
Model: Cherokee
Engine: one that makes noise

and if you were a day earlier i new a guy selling some decent 39.5's
CF Veteran
Joined: Sep 2010
Posts: 1,930
Likes: 0
From: herriman
Year: 1991
Model: Cherokee
Engine: 4.0
If you do an Atlas...yes 
If you want to try a 4:1 in the transfercase, you should be able to accomplish it for much less than that. A kit would be $800 - $1200 new. But if you can find either a NP231 or a D300 that has one in it already, it would be cheaper. Most (or all as far as I know) D300's need to be run upside down, since they came in rigs with passenger side pumpkins. The NP231's are more straight forward.
While the planetaries CAN burn up in them if you go too fast, they are no death trap. You just need to be good about switching to high range when you get out in the open and want some speed. If you stay out of 4th and especially 5th gear in low range with a NP231 4:1, you should be fine. When we are both on the trail some time, you can ride in my rig and I can show you the difference between 2.72:1 and 4:1. It is totally worth it when you have a manual trans IMO.
If you want to try a 4:1 in the transfercase, you should be able to accomplish it for much less than that. A kit would be $800 - $1200 new. But if you can find either a NP231 or a D300 that has one in it already, it would be cheaper. Most (or all as far as I know) D300's need to be run upside down, since they came in rigs with passenger side pumpkins. The NP231's are more straight forward.
While the planetaries CAN burn up in them if you go too fast, they are no death trap. You just need to be good about switching to high range when you get out in the open and want some speed. If you stay out of 4th and especially 5th gear in low range with a NP231 4:1, you should be fine. When we are both on the trail some time, you can ride in my rig and I can show you the difference between 2.72:1 and 4:1. It is totally worth it when you have a manual trans IMO.
CF Veteran
Joined: Aug 2010
Posts: 1,326
Likes: 0
From: Huricane, Utah
Year: 1994 Ford Bronco
Model: Cherokee
Engine: 351 W
Originally Posted by jmaxj
my doubler is expensive you'd be better off buying two atlas's 
and if you were a day earlier i new a guy selling some decent 39.5's

and if you were a day earlier i new a guy selling some decent 39.5's
Seasoned Member
Joined: Jan 2011
Posts: 423
Likes: 0
From: fairview utah
Year: 1988
Model: Cherokee
Engine: 4.0
Originally Posted by customzj73
Anyone have some 39-42's laying around that are decent?
Last edited by huntingman2706217; Feb 28, 2012 at 09:58 AM.
MJ>XJ
Joined: Mar 2009
Posts: 17,836
Likes: 7
From: Griffin, G.A.
Year: 1990
Model: Comanche
Engine: 4.0 I6
Originally Posted by john78
are you the only zj running with this click (not trying to sound like a butt)
Thanks guys...



run a waggy front and run a adapter in the rear