Northern Utah BS thread
Lol, looks cool!
CF Veteran
Joined: Sep 2010
Posts: 4,968
Likes: 0
From: Salt Lake City, UT
Year: 2000
Model: Cherokee
Engine: 4.0L
Not a bad deal on sliders. just give them measurements and its 130$... Wish I could have gotten some of these.... would have saved some money!
http://www.rme4x4.com/showthread.php?87830-New-year-slider-sale!&p=819817#post819817
http://www.rme4x4.com/showthread.php?87830-New-year-slider-sale!&p=819817#post819817
CF Veteran
Joined: Jan 2009
Posts: 1,703
Likes: 0
From: Utardiland
Year: whats left of a 91
Model: Cherokee
Engine: one that makes noise
i dunno if i'd trust him tho, he was quoting some dude a while back 300 for a full cage including materials. there's no way if he's gonn do it with DOM or HREW he could build a cage and come out ahead in that deal. plus some of his stuff he's posted on RME seem sketchy to me.
i don't know the guy all i know is one of the rigs he built and it wasn't much past a carbon county contraption lol
just my opinion tho, if someone does go that route i'd like to check them out to cure some curiosity.
i don't know the guy all i know is one of the rigs he built and it wasn't much past a carbon county contraption lol
just my opinion tho, if someone does go that route i'd like to check them out to cure some curiosity.
CF Veteran
Joined: Sep 2010
Posts: 4,968
Likes: 0
From: Salt Lake City, UT
Year: 2000
Model: Cherokee
Engine: 4.0L
i dunno if i'd trust him tho, he was quoting some dude a while back 300 for a full cage including materials. there's no way if he's gonn do it with DOM or HREW he could build a cage and come out ahead in that deal. plus some of his stuff he's posted on RME seem sketchy to me.
i don't know the guy all i know is one of the rigs he built and it wasn't much past a carbon county contraption lol
just my opinion tho, if someone does go that route i'd like to check them out to cure some curiosity.
i don't know the guy all i know is one of the rigs he built and it wasn't much past a carbon county contraption lol
just my opinion tho, if someone does go that route i'd like to check them out to cure some curiosity.
Who said Cherokees don't have a frame! https://www.cherokeeforum.com/f46/xj-framed-124701/
Last edited by Gorillaxj; Feb 18, 2012 at 07:31 AM.
Senior Member
Joined: Oct 2009
Posts: 859
Likes: 0
From: Hyrum,UT
Year: 2001
Model: Cherokee
Engine: 1-6 4.0
That guy was Sean's (orviscrawler) buddy, I guess he is a punk. Sean pretty much did his SAS on his runner for him. since he kind of helped sean now he thinks he can fab and opened a shop. I was going to get some of those and Sean told me hell no don't do it!
Senior Member
Joined: Nov 2009
Posts: 842
Likes: 0
From: SLC Utah
Year: 1998
Model: Cherokee
Engine: I6
Lol, Well good to know! scratch that then! I guess if you want inexpensive and don't want to build them yourself Trail-gears sliders are pretty good lol
Who said Cherokees don't have a frame! https://www.cherokeeforum.com/f46/xj-framed-124701/
Who said Cherokees don't have a frame! https://www.cherokeeforum.com/f46/xj-framed-124701/
if your looking for sliders id recommend these... i had them on my old xj and Jason (Floydxj) has them and i loved them and im sure Jason would say the same. http://www.ajsoffroadarmor.com/produ...cat=250&page=1
Senior Member
Joined: Jan 2010
Posts: 855
Likes: 0
From: Taylorsville, UT
Year: 1999
Model: Cherokee
Engine: 4.0L
if your looking for sliders id recommend these... i had them on my old xj and Jason (Floydxj) has them and i loved them and im sure Jason would say the same. http://www.ajsoffroadarmor.com/produ...cat=250&page=1
Yup - as far as bought rails go, they are sweet!
Senior Member
Joined: Jan 2010
Posts: 855
Likes: 0
From: Taylorsville, UT
Year: 1999
Model: Cherokee
Engine: 4.0L
Bummer! Just before tearing into the front end to do the high steer, I noticed the clearance on the new tie rod was insufficient.
I need either a pair or at least a passenger side flat top D44 knuckle...let me know if you know of one! It MUST have the stock cast arm still on it.
On a related note, I have 2 flat top D44 knuckles without the stock arm available for sale. They have never been run and have new ball joints
On the bright side, I did get the motor mounts replaced finally, as well as the Durango steering box upgrade.
I need either a pair or at least a passenger side flat top D44 knuckle...let me know if you know of one! It MUST have the stock cast arm still on it.
On a related note, I have 2 flat top D44 knuckles without the stock arm available for sale. They have never been run and have new ball joints
On the bright side, I did get the motor mounts replaced finally, as well as the Durango steering box upgrade.
CF Veteran
Joined: Sep 2010
Posts: 1,930
Likes: 0
From: herriman
Year: 1991
Model: Cherokee
Engine: 4.0
if your looking for sliders id recommend these... i had them on my old xj and Jason (Floydxj) has them and i loved them and im sure Jason would say the same. http://www.ajsoffroadarmor.com/produ...cat=250&page=1
Thread Starter
CF Veteran
Joined: Sep 2009
Posts: 3,612
Likes: 0
From: West Valley
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
Looking like a pretty good turnout might occur for little Moab, spring fever seems to be runnng rampant! I for one look forward to getting out of the house and playing. Thats what it's all about.
CF Veteran
Joined: Dec 2010
Posts: 2,366
Likes: 0
From: Spanish Fork, Utah
Year: 1989
Model: Cherokee
Engine: Renix 4.0L
Originally Posted by Desert Rat
Looking like a pretty good turnout might occur for little Moab, spring fever seems to be runnng rampant! I for one look forward to getting out of the house and playing. Thats what it's all about.