You have to swap the trans with one that's external.

 

Or just the bellhousing!

 

yeah, the big joints at the cross member, and the smaller joints where the upper arm meats the lower. they all go bad about 1/4 onto an actual trail.... But I am going to go with Clayton Joints, they seam to be known for lasting.

yes sir, Was going to go to the last one, but plans got in the way, seams like it would be worth it to just go screw around on the coarse, a lot of good guys put it together.

all the info is here. http://www.rme4x4.com/showthread.php...702#post808702

 

Probably be fun to go to, but I'm a sissy when it comes to the cold, I avoid it whenever possible. The weather this morning tells me I made a good choice opting out on it this year.
The all Jeep show should be coming up at MMSP in March or April, we should all plan on going out and running the course then (I did'nt get to play last year due to my locker being jacked up).

 

So I'm going to pick up some 35x12.5 tires how much shaving am I going to have to do to get them to fit on about a 3-4 inch lift?

 

So since I have the ba trans just swap it with a newer ax bell housing?

 

Anyone want an 86 2door? A friends brother is selling it. 500 but I'm sure it could be talked down. Maybe even just parts but not sure.

 

What condition are the doors in?

 

I am not sure on what the housing looks like between the two, but thought the input portion on the case of the trans (not the bell housing) was different, but have not done it before.....

 

Let see some pic if it dose it run

 

Im not 100% sure either. But i looked into it before, because i have the internal slave on mine. And from what i found it was just the bellhousing. But i could be wrong!

 

Anyone have a trac bar & frame mount they wanna sell me? Or trade for an adjustable RE track bar stubbornly mounted to a followed out frame mount...

 

Is the track bar shot? If not and the mounts the issue, I'd think a mount should be easely obtainable from the JY.

 

Had a blast at the RME event other than my tent caving in on me from the wind LOL

 

no the track bar is in good condition the joint nut is just seized on the frame side mount. The mount has been wollowed out from DW!