no difference, both are c clips i'm pretty sure

 

Oooo just more splines/stronger axle...

 

Nice! If I am on solid rock (anything in moab) lol Turning is almost impossible...

depends on your future plans. if your just going 33's then its ok, any bigger get 29 spline, D44, or 8.8 for the rear...

The front D30 is ok for up to 35's. after then the D44 is a bit better, then the D60, and the rockwell. None of which are bolt in unless you get a rubicon D44.

Spartans are good for a lunchbox locker!

yes C-clips are goofy!

27 + 29 splines are C-clips.

 

basically. mine has 30

 

hey i did say up hill on solid rock. down hill it unlocks and kinda gives me a chance to go where i want to

 

 

Yea I won't be going pass 33's any time soon...

 

Well, I plasma-ed off my track bar bracket, cleaned it up, welded on the new one. Then welded one ram mount onto the axle. The mount I bought with a skid on it wouldn't fit above the tie rod, it would hit when flexed... so I went with another bracket... need another ram mount. hopefully button it up this week.

But my track bar is just about perfect!

 

look's pretty

 

If you get froggy I have a 8.25 29 3/55 lock right locker 1hr job to swap I will sell

 

that'd be a good swap but it's a little different gear set up than his

 

I bought my spartin 29 spline for 380

 

cheapest one i can find was 350. that's a rip, the cheapest dana 44 one i can find is 280

 

is there anyone on the forum that can swap an 8.8 in for my brother's zj?

 

I like this... How much?