Four Corners Colorado, New Mexico, Utah & Arizona

New Mexico Roll Call.

Thread Tools
 
Search this Thread
 
Old Apr 22, 2012 | 08:32 AM
  #3031  
crux's Avatar
Member
 
Joined: Sep 2010
Posts: 225
Likes: 1
From: ABQ
Year: 1996
Model: Cherokee
Engine: 4.0
Default

Originally Posted by Jrock(fos)
Hay you guys, so little more damage then I thought. Broke off a motor mount bolt and a mount on the right. It's sitting on the distributor. Anyone know of any good shops? I don't have the tools to lift the motor and do it all myself.

Sorry to hear it. Would grab a block of wood for between the jack and motor lifting it up. Might also need a ratcheting tie down strap moving the motor fore / aft a little once broke loose. While your at it would suggest upgrading the motor mounts to some brown dog units. These guys are very helpful and you could even give them a call at 7:30 on Sunday morning and they pick up helping you out. Job only requires hand tools and would expect roughly an hour each side. I don't have a big floor jack right now or I'd be happy to help out.

Motor mounts:
http://browndogindustries.com/cherok...-2000-40l.aspx
Reply
Old Apr 22, 2012 | 10:02 AM
  #3032  
RoughNeck93XJ's Avatar
Seasoned Member
 
Joined: Apr 2012
Posts: 279
Likes: 0
From: Albuquerque NM
Year: 1993
Model: Cherokee
Engine: 4.0HO
Default

Thanks guys. I'm actually trying to move septa from one part of the company to another part. Gonna be a move up. Hope to find out soon if I get the interview.
Reply
Old Apr 23, 2012 | 10:41 AM
  #3033  
alfreado121's Avatar
CF Veteran
 
Joined: Jan 2010
Posts: 1,488
Likes: 0
From: Albuquerque
Year: 1995
Model: Cherokee
Engine: 4.0
Default

Been a while since iv been able to log in here.
What's the update on our trail ride meet?

I also painted my rims bright orange it's cooool
Reply
Old Apr 23, 2012 | 12:32 PM
  #3034  
Jrock(fos)'s Avatar
CF Veteran
 
Joined: Mar 2012
Posts: 3,404
Likes: 1
From: Albuquerque, NM
Year: 1995
Model: Cherokee
Engine: 4.0
Default

Originally Posted by alfreado121
Been a while since iv been able to log in here.
What's the update on our trail ride meet?

I also painted my rims bright orange it's cooool
Mid May is what it's starting to sound like. No exact date yet that I know?

Oh and on the cool... Fwah za for ya Alan.
Attached Thumbnails New Mexico Roll Call.-image-2108149833.jpg  
Reply
Old Apr 23, 2012 | 01:00 PM
  #3035  
zwhiz's Avatar
CF Veteran
 
Joined: Oct 2009
Posts: 2,300
Likes: 0
From: Alaska
Model: Cherokee
Default

lookin good alan!
Reply
Old Apr 23, 2012 | 09:20 PM
  #3036  
hbracing13's Avatar
CF Veteran
10 Year Member
 
Joined: Sep 2011
Posts: 1,874
Likes: 1
From: new mexico
Year: 88
Engine: 4.0
Default

Anyone need some exterior/interior parts 88-95. I have parts jeep that I need to finish parting out cut up and scrap
Reply
Old Apr 23, 2012 | 10:11 PM
  #3037  
ejxj96's Avatar
Junior Member
 
Joined: Mar 2011
Posts: 77
Likes: 0
From: Albuquerque
Year: 1996
Model: Cherokee
Default

Originally Posted by hbracing13
Anyone need some exterior/interior parts 88-95. I have parts jeep that I need to finish parting out cut up and scrap
How much do you want for the doors?
Reply
Old Apr 23, 2012 | 10:29 PM
  #3038  
hbracing13's Avatar
CF Veteran
10 Year Member
 
Joined: Sep 2011
Posts: 1,874
Likes: 1
From: new mexico
Year: 88
Engine: 4.0
Default

They are pretty beat the jeep was rolled and then was cut up to drive it back so it looks like a comanche. I was goin to try to keep the front doors for half doors but I haven't taken them off to see if there even able to be saved ill take some pictures tomorrow I also have it on craigslist too but no pictures yet
Reply
Old Apr 23, 2012 | 10:54 PM
  #3039  
SteelBlue99's Avatar
CF Veteran
 
Joined: Jul 2010
Posts: 1,208
Likes: 1
From: Albuquerque
Year: 1999
Model: Cherokee
Engine: 4.0
Default

Looks good Alan! I know hbracing said it probably won't be able to make it, but how does Sunday May 13th work for everyone?
Reply
Old Apr 23, 2012 | 11:01 PM
  #3040  
lonewolf53's Avatar
Senior Member
 
Joined: Jul 2011
Posts: 745
Likes: 0
From: Los Lunas, NM
Year: 1998
Model: Cherokee
Engine: 4.0L High Output
Default

may 13th for me would work but only in the morning and id need to leave about 2 or 3
Reply
Old Apr 23, 2012 | 11:03 PM
  #3041  
SteelBlue99's Avatar
CF Veteran
 
Joined: Jul 2010
Posts: 1,208
Likes: 1
From: Albuquerque
Year: 1999
Model: Cherokee
Engine: 4.0
Default

Originally Posted by lonewolf53
may 13th for me would work but only in the morning and id need to leave about 2 or 3
Same here, so that'd work out perfectly.
Reply
Old Apr 23, 2012 | 11:10 PM
  #3042  
lonewolf53's Avatar
Senior Member
 
Joined: Jul 2011
Posts: 745
Likes: 0
From: Los Lunas, NM
Year: 1998
Model: Cherokee
Engine: 4.0L High Output
Default

are any of you interested in the trip to jemez? a date will be figured out on wednesday but it will be for sure in late may if your interested in it ill post the current info on the trip
Reply
Old Apr 24, 2012 | 01:12 AM
  #3043  
Jrock(fos)'s Avatar
CF Veteran
 
Joined: Mar 2012
Posts: 3,404
Likes: 1
From: Albuquerque, NM
Year: 1995
Model: Cherokee
Engine: 4.0
Default

The 13th I wish I could do but I have to request it off 3 weeks in advance cuz of work so can't. Damn Wally's
Reply
Old Apr 24, 2012 | 07:42 AM
  #3044  
RoughNeck93XJ's Avatar
Seasoned Member
 
Joined: Apr 2012
Posts: 279
Likes: 0
From: Albuquerque NM
Year: 1993
Model: Cherokee
Engine: 4.0HO
Default

May 13th for ??

Hbracing13 how much for the seats.
Reply
Old Apr 24, 2012 | 09:09 AM
  #3045  
SteelBlue99's Avatar
CF Veteran
 
Joined: Jul 2010
Posts: 1,208
Likes: 1
From: Albuquerque
Year: 1999
Model: Cherokee
Engine: 4.0
Default

Originally Posted by Jrock(fos)
The 13th I wish I could do but I have to request it off 3 weeks in advance cuz of work so can't. Damn Wally's
It's close enough to 3 weeks, isn't it? 19 days away instead of 21.
Reply



All times are GMT -5. The time now is 09:48 AM.