New Mexico Roll Call.

Subscribe
Jul 12, 2011 | 11:37 AM
  #2011  
Quote: Anyone have any 33's for sale??
what are you looking for? i have 4 bfg at 33x12.5x15 on15x10 AR wheels. Tires have fair amount of tread but are weather checked. I ran for a while, they would get you buy for a while 100.00 tires and wheels,you could prob sell wheels and get your money back?

New Mexico Roll Call.-dscn1320.jpg  

Reply 0
Jul 12, 2011 | 01:39 PM
  #2012  
Hey guys, don't post here hardly at all but awhile back I bought an XJ from one of your members ncsmith. Well I never got the time to get it the attention it deserves and now my wife and I are moving again so it's for sale. It's an 87 waggy, rough around the edges but it has a D44 and an HP D30. Bit of a lift, drop brackets on stock arms, 31" BFG MT's but the fronts have camber wear from an issue that was fixed, Bushwacker fender flares and more. I'm including some parts that came with it when I bought it as well as a few I gathered for it but never got around to putting in. When it warms up it's idling high, especially in the warm weather. I think it's the coolant temp sensor which is included in the parts pile. I need $1500 out of it and that's a bottom line. I'd go $1250 minus the flares. Really like to see it go to a good home! I'm in the Farmington area, call if interested: 505-635-3366 Ryan.

http://farmington.craigslist.org/cto/2480790782.html
Reply 0
Jul 12, 2011 | 11:59 PM
  #2013  
Quote: All good, my question to you is is this a bolt in kit you're installing or what are you working with? I really didn't hear or follow up on what lift you were planning on buying or what you acquired?
Rc 6.5 la had it for several months now waiting to put it on. Basically brackets that bolt on the cross member that require drilling 4 holes. Pretty straight forward. I just always second guess myself and that's never good.
Reply 0
Jul 13, 2011 | 12:36 AM
  #2014  
Quote: Rc 6.5 la had it for several months now waiting to put it on. Basically brackets that bolt on the cross member that require drilling 4 holes. Pretty straight forward. I just always second guess myself and that's never good.
Oh ok simple job bro, post the best time you got this week before Friday if you need a hand. Have a drill and tap/dye set if you need.
Reply 0
Jul 13, 2011 | 09:53 AM
  #2015  
I might need the tap and die set I might of cross threaded a bolt for my cross member. I let you know. I havent .had much time to do anything I got my replacement axle I need to swap everything over tho like rotors n everything
I have my old lift parts for sale. And a skyjacker adjustable track bar.
Reply 0
Jul 14, 2011 | 12:28 AM
  #2016  
Espanola in the house!!!
Reply 0
Jul 14, 2011 | 09:28 PM
  #2017  
Wow what a sweet snag today HP Dana 44 cheep SWEEEET . Went to u pull it today not a bunch of cool stuff but about 8 or 10 xj's and 4 or 5 zj or so....plenty of stock parts
Reply 0
Jul 14, 2011 | 10:56 PM
  #2018  
Los Lunas checking in
Reply 0
Jul 15, 2011 | 12:26 AM
  #2019  
Quote: Wow what a sweet snag today HP Dana 44 cheep SWEEEET . Went to u pull it today not a bunch of cool stuff but about 8 or 10 xj's and 4 or 5 zj or so....plenty of stock parts
Did you happen to see any with the front seats still in it (fair condition, preferably leather 97+)?



P/S for anyone interested my rear 96 or lower rear seat gray (out of 4door) i will sell cheap -- fair condition, far from mint. My jeep just turned into a two seater.

Also looking to buy a rear hatch door for a 96 or lower XJ. Doesn't need a window and cosmetics can be poor to fair any color. Rather not have to go to u-pull-it unless I have to.
Reply 0
Jul 15, 2011 | 01:39 PM
  #2020  
Quote: Did you happen to see any with the front seats still in it (fair condition, preferably leather 97+)?

NO Leather

P/S for anyone interested my rear 96 or lower rear seat gray (out of 4door) i will sell cheap -- fair condition, far from mint. My jeep just turned into a two seater.

Also looking to buy a rear hatch door for a 96 or lower XJ. Doesn't need a window and cosmetics can be poor to fair any color. Rather not have to go to u-pull-it unless I have to.
I was not looking for seats for sure but it all depends on your version of fair LOL I would say ya I think there were some gray ones that were in fair shape, you know all of them would need a good cleaning. Hope that helps
Reply 0
Jul 15, 2011 | 05:03 PM
  #2021  
just finished my brakes
drum brakes still suck to do but i got them done pretty easy without any issues
Reply 0
Jul 15, 2011 | 05:32 PM
  #2022  
Quote: just finished my brakes
drum brakes still suck to do but i got them done pretty easy without any issues
At least you got them done! Hopefully I won't have to do my rear drums, right now i'm looking for a rear disc swap from a Grand Cherokee.
Reply 0
Jul 15, 2011 | 05:36 PM
  #2023  
I will be wheeling on 5000 acres of unwheeled land next wseekend up around las vegas nm with our meet and greet yay!
Reply 0
Jul 15, 2011 | 08:07 PM
  #2024  
Where abouts is it 96? Used to live close to there.
Reply 0
Jul 16, 2011 | 01:09 AM
  #2025  
a rear disc swap would be a must if i had the time and money

meet and great?? in about what area? i might be able to ditch a weekend at the old J O B and come play
Reply 0