Denver bs thread
CF Veteran
Joined: Aug 2011
Posts: 3,648
Likes: 4
Model: Cherokee
That deal on the front is like an inch thick. I should have gotten pics of it out, but I wanted to get that **** done.
It has sleeves, c gussets, UCA box, beefcake truss. New inner seals.
Rear has hoss truss, put in new superior axles (which are too long in the carrier after the c clip. Need to be ground down 3 mm or so, I found this out after I installed everything). New rear drums/shoes, new seals, new bearings.
It has sleeves, c gussets, UCA box, beefcake truss. New inner seals.
Rear has hoss truss, put in new superior axles (which are too long in the carrier after the c clip. Need to be ground down 3 mm or so, I found this out after I installed everything). New rear drums/shoes, new seals, new bearings.
Last edited by mr white; Aug 31, 2012 at 10:14 PM.
Newbie
Joined: Aug 2012
Posts: 14
Likes: 0
From: Boulder, Co.
Year: 1995
Model: Cherokee
Engine: 4.0L
hey all
Hello all,
Im a newb. I just bought my first jeep. Ive been an automotive tech for 10 years. Excited to build my first offroad/trail vehicle. 95 sport with 250k miles. It's beat to crap but the price was right. Doing a complete tune up service and revamp of the cooling system this weekend. Also have a spare d30 that I have to swap in since the PO went jumping and bent the front axle to hell.
I've read through at least 300 pages of this thread and Im really excited. Only wheeling ive ever done was back in 98 with a stock 92 XJ up lefthand canyon. Wanted one ever since. Can't wait till I can afford for Hudfab to do some tinkering. I have quite a bit of fab experience from previous jobs, but just moved from out of state and dont have access to a welder. Anybody have an extra mig setup they wanna sell cheap?
Im a newb. I just bought my first jeep. Ive been an automotive tech for 10 years. Excited to build my first offroad/trail vehicle. 95 sport with 250k miles. It's beat to crap but the price was right. Doing a complete tune up service and revamp of the cooling system this weekend. Also have a spare d30 that I have to swap in since the PO went jumping and bent the front axle to hell.
I've read through at least 300 pages of this thread and Im really excited. Only wheeling ive ever done was back in 98 with a stock 92 XJ up lefthand canyon. Wanted one ever since. Can't wait till I can afford for Hudfab to do some tinkering. I have quite a bit of fab experience from previous jobs, but just moved from out of state and dont have access to a welder. Anybody have an extra mig setup they wanna sell cheap?
CF Veteran
Joined: May 2011
Posts: 2,320
Likes: 0
From: Aurora, Co
Year: 1995
Model: Cherokee
Engine: 4.0 HO
Originally Posted by billdapart
Hello all,
Im a newb. I just bought my first jeep. Ive been an automotive tech for 10 years. Excited to build my first offroad/trail vehicle. 95 sport with 250k miles. It's beat to crap but the price was right. Doing a complete tune up service and revamp of the cooling system this weekend. Also have a spare d30 that I have to swap in since the PO went jumping and bent the front axle to hell.
I've read through at least 300 pages of this thread and Im really excited. Only wheeling ive ever done was back in 98 with a stock 92 XJ up lefthand canyon. Wanted one ever since. Can't wait till I can afford for Hudfab to do some tinkering. I have quite a bit of fab experience from previous jobs, but just moved from out of state and dont have access to a welder. Anybody have an extra mig setup they wanna sell cheap?
Im a newb. I just bought my first jeep. Ive been an automotive tech for 10 years. Excited to build my first offroad/trail vehicle. 95 sport with 250k miles. It's beat to crap but the price was right. Doing a complete tune up service and revamp of the cooling system this weekend. Also have a spare d30 that I have to swap in since the PO went jumping and bent the front axle to hell.
I've read through at least 300 pages of this thread and Im really excited. Only wheeling ive ever done was back in 98 with a stock 92 XJ up lefthand canyon. Wanted one ever since. Can't wait till I can afford for Hudfab to do some tinkering. I have quite a bit of fab experience from previous jobs, but just moved from out of state and dont have access to a welder. Anybody have an extra mig setup they wanna sell cheap?
CF Veteran
Joined: May 2012
Posts: 3,242
Likes: 2
From: Colorado
Year: 1992 Cherokee Sport
Engine: Bone-Stock 242
Where are you Bill? I'm a loner up in Greeley, most people are around Aurora.
And I agree with Fish about a meet n greet. But make it somewhere up north so i don't have to drive 2 hours -.-
And I agree with Fish about a meet n greet. But make it somewhere up north so i don't have to drive 2 hours -.-
CF Veteran
Joined: Aug 2011
Posts: 3,648
Likes: 4
Model: Cherokee
Senior Member
Joined: Sep 2011
Posts: 733
Likes: 0
From: Arvada
Year: 2000
Model: Cherokee
Engine: 4.0L Inline 6
CF Veteran
Joined: May 2012
Posts: 3,242
Likes: 2
From: Colorado
Year: 1992 Cherokee Sport
Engine: Bone-Stock 242
Nothing but dirt roads around here. Maybe the occasional puddle. BEst off-roading i;ve done in my rig is cross a drainage ditch just outside my neighborhood. That did not go well.
I think i high-centered. All i know is my back tire was not spinning, so idk what happened.
And who's Colton? Still learning names
I think i high-centered. All i know is my back tire was not spinning, so idk what happened.
And who's Colton? Still learning names
Last edited by 1976Mustang; Aug 31, 2012 at 10:38 PM.
CF Veteran
Joined: Apr 2011
Posts: 7,842
Likes: 2
From: Loveland CO
Year: 1993
Model: Cherokee
Engine: l6
Originally Posted by 1976Mustang
Where are you Bill? I'm a loner up in Greeley, most people are around Aurora.
And I agree with Fish about a meet n greet. But make it somewhere up north so i don't have to drive 2 hours -.-
And I agree with Fish about a meet n greet. But make it somewhere up north so i don't have to drive 2 hours -.-
CF Veteran
Joined: Apr 2011
Posts: 7,842
Likes: 2
From: Loveland CO
Year: 1993
Model: Cherokee
Engine: l6
Originally Posted by 1976Mustang
Nothing but dirt roads around here. Maybe the occasional puddle. BEst off-roading i;ve done in my rig is cross a drainage ditch just outside my neighborhood. That did not go well.
I think i high-centered. All i know is my back tire was not spinning, so idk what happened.
And who's Colton? Still learning names
I think i high-centered. All i know is my back tire was not spinning, so idk what happened.
And who's Colton? Still learning names