Denver bs thread
CF Veteran
Joined: May 2009
Posts: 1,154
Likes: 1
From: Centennial ! 80015
Year: 1991
Model: Cherokee
Engine: 4.6 stroker ;)
Originally Posted by hudfabxj
Has basic autolites in it. There is no colder plug!! )2 is also working properly. Only other thing I could think of was the knock sensor causing it to run lean and burn hot. Replaced that $65 turd, and not the case. Its at 12* advanced timing, but I dont know where it should actually be?. Google search is in order...... The timing is not adjustable as the PCM contorls it. I dont know what other sensors would make it advance and cause it to run lean.
I HATE RENIX CRAP JUNK!!!!!!!!!
I need to see these in action! I have been eyeballing those and the grabber red labels.
CF Veteran
Joined: May 2009
Posts: 1,154
Likes: 1
From: Centennial ! 80015
Year: 1991
Model: Cherokee
Engine: 4.6 stroker ;)
Originally Posted by hudfabxj
CF Veteran
Joined: Oct 2010
Posts: 1,191
Likes: 1
From: Aurora, CO
Year: 1988
Model: Cherokee
Engine: 4L I6
Good job man, btw I'm having an engagement party this saturday at 5494 s. dunkirk way centennial, co 80015. It's a bbq and everyone is welcome to celebrate our engagement. Starts at noon n goes til like 4ish or 5
CF Veteran
Joined: May 2011
Posts: 2,320
Likes: 0
From: Aurora, Co
Year: 1995
Model: Cherokee
Engine: 4.0 HO
Originally Posted by Grolla42
Good job man, btw I'm having an engagement party this saturday at 5494 s. dunkirk way centennial, co 80015. It's a bbq and everyone is welcome to celebrate our engagement. Starts at noon n goes til like 4ish or 5
CF Veteran
Joined: May 2011
Posts: 2,320
Likes: 0
From: Aurora, Co
Year: 1995
Model: Cherokee
Engine: 4.0 HO
Originally Posted by Grolla42
I'm actually on tower and hampden right now, about to move off of chambers and mississippi. But that's my future in-laws place
CF Veteran
Joined: Jan 2011
Posts: 2,765
Likes: 0
From: Littleton, CO
Year: 1991
Model: Cherokee
Engine: 2001 4.0L
"So I point one back at em, but not the index or pinky or the ring or the the thumb. Its the one you put up when you dont give a $%^&."---Eminem
Haha!
Last edited by MallCrawlXJ; Jul 18, 2012 at 07:38 AM.
CF Veteran
Joined: Jan 2011
Posts: 2,765
Likes: 0
From: Littleton, CO
Year: 1991
Model: Cherokee
Engine: 2001 4.0L
Tried a 195*...same symptoms
Tried a 165*...same symptoms
Tried without t-stat...same symptoms.
Im at a loss and havent touched it in days.
Thanks for all the pointers though!
BTW, swapping 4.0Ls can be a huge pain at times!!! Esp. when the person is rocking TNT long arms with the belly pan. Had to drop the axle to change the engine.
While changing this customers engine, I found some HUGE cracks on his newish Banks header. I was a little suprized at this.
CF Veteran
Joined: May 2009
Posts: 1,154
Likes: 1
From: Centennial ! 80015
Year: 1991
Model: Cherokee
Engine: 4.6 stroker ;)
Originally Posted by hudfabxj
Tried a 195*...same symptoms
Tried a 165*...same symptoms
Tried without t-stat...same symptoms.
Im at a loss and havent touched it in days.
Thanks for all the pointers though!
BTW, swapping 4.0Ls can be a huge pain at times!!! Esp. when the person is rocking TNT long arms with the belly pan. Had to drop the axle to change the engine.
While changing this customers engine, I found some HUGE cracks on his newish Banks header. I was a little suprized at this.