Denver bs thread
CF Veteran
Joined: May 2011
Posts: 2,320
Likes: 0
From: Aurora, Co
Year: 1995
Model: Cherokee
Engine: 4.0 HO
Originally Posted by TheCK4x4
I would like 35s or 36s. Anything with a 15inch wheel
CF Veteran
Joined: Oct 2010
Posts: 1,191
Likes: 1
From: Aurora, CO
Year: 1988
Model: Cherokee
Engine: 4L I6
If you have a C8.25 I'd say almost skip gearing unless you'll keep it for a while. Gearing for the 8.25 is just way overpriced for what it is; although better than the D35 lol
So I ****ed up on the spartan locker install. Those things are a damn puzzle to get in. I saved the c clips for last, there are slits in the locker to slide them in. I was dumb and removed the pins holding the spring pin things in so I could turn it. Anyway, I was sliding the c clips in while my brother was pulling the axle shaft outwards hoping they would just catch and slide in. He slid it a little too fast and the clip did not grab, **** fell out in the locker. Now I need to take it all back out. :|
Any tips for removing a locker that's already been installed? :P
Any tips for removing a locker that's already been installed? :P
You have 31s? My bro needs some with good tread to make him through the winter. My 33s don't have much tread left, probably 6/32s ish. There are 5 of them, procomp MTRs on wheels. If you're interested in a possible trade, pm me.
CF Veteran
Joined: May 2011
Posts: 2,320
Likes: 0
From: Aurora, Co
Year: 1995
Model: Cherokee
Engine: 4.0 HO
Originally Posted by mr white
You have 31s? My bro needs some with good tread to make him through the winter. My 33s don't have much tread left, probably 6/32s ish. There are 5 of them, procomp MTRs on wheels. If you're interested in a possible trade, pm me.
Originally Posted by mr white
You guys must think I'm a tire salesmen. :P
I'm just on craigslist all the time. In the market for dana30 chromos if you guys see any. LOL



