Not even cranking. Trying to go wheeling this weekend and can't with a jeep that won't run! Replaced nss and starter relays . Gonna test starter tomorrow.

 

Mine would do that to me about once a week........My temp fix was,(don't laugh) Hit it with a hammer..........
I carried a 20" socket extension and a hammer with me in the Jeep for a couple months. So I could hit it from the top (The starter)without crawling underneath.
When it started doing it 2 or 3 times a week, I figured it was time to replace the starter, before it left me stranded alltogether.
If you need one, I can get you a good deal on one.

 

Battery dead? If not try hitting the starter. It does work for the most part.

 

Well I havn't exactly put it on CL yet

 

Tried hitting the starter have plenty of power at battery. I'm honestly stumped I
Have a few more tricks for tomorrow after the jy

 

Does the starter relay "click" when you hit the key switch?
If yes, then the wire that runs from the relay down to the starter solenoid runs through a connector first (it is about halfway between the relay/fuse box, and the oil filter area).Maybe it came unplugged at that connector somehow? If you get power all the way down to the solenoid when you hit the keyswitch, then your starter crapped out.

If you get no click, or power to the relay, then your ignition switch, or NSS are giving you trouble.

 

Do you have to be 18 to buy antifreeze haha?

 

Don't think so.

 

You can jump power straight to the starter and bypass the solenoid.

 

I work as a CO so everyday is an adventure lol

 

Mine was doing the when the CPS went out

 

So what is a fairly inexpensive way to set up some recovery points? Thinking about doing that after I get my radiator in and after I pick up some JKS quick discos.

 

Fairly new on mine tho. It won't even crank tho:/

 

Get that starter bench tested Seth....it really sounds like the issue.

 

Cam sensor. My 90 wouldn't do anything and would not start. Unplugged it then plugged it back in, started right up