is there anyone else in cen cal?

Subscribe
Apr 14, 2012 | 11:16 AM
  #406  
Quote: I'm with Gary. I ended up having to cut mine out. And 1 bolt broke off inside with the breaker bar. Luckily it still had a little nub sticking out that I welded another bolt on. Then Lots of heat and about an hour later I finally got it out. The leafs and the shackles were the worst part of my lift.
Yeah, I'm probably going to have to cut them. I've had the front apart before so it shouldn't be an issue, but afaik the leaf springs and shackles have never been off.
Reply 0
Apr 14, 2012 | 08:01 PM
  #407  
Well I still want them even if you have to cut the bolts, as long as the springs are still good lol. I'm ready to come pick them and the axle up :-)
Reply 0
Apr 14, 2012 | 09:25 PM
  #408  
Quote: Well I still want them even if you have to cut the bolts, as long as the springs are still good lol. I'm ready to come pick them and the axle up :-)
Not having much luck yet, got the front leaf bolts out, but broke both weld nuts on the shackles. While taking off the rear shocks they were finger tight... weld nuts already broken. So I took the carpet out and started cutting up the floor in the cargo area, ran out of sawzall blades while trying to cut the shackle bolts, think I'm calling it a night.

Really hope the front goes smoother.
Reply 0
Apr 14, 2012 | 09:28 PM
  #409  
That's ****ty bro
Reply 0
Apr 14, 2012 | 09:41 PM
  #410  
Quote: That's ****ty bro
I figured the back was going to give me problems, 20 year old jeep from Montana.
Reply 0
Apr 15, 2012 | 12:26 AM
  #411  
Mine was originally sold in Utah, so I feel your pain. Nothing on the undercarriage comes off easy!
Reply 0
Apr 15, 2012 | 02:25 AM
  #412  
Quote:
Not having much luck yet, got the front leaf bolts out, but broke both weld nuts on the shackles. While taking off the rear shocks they were finger tight... weld nuts already broken. So I took the carpet out and started cutting up the floor in the cargo area, ran out of sawzall blades while trying to cut the shackle bolts, think I'm calling it a night.

Really hope the front goes smoother.
If you need help on Thursday let me know and I'll bring the angle grinder and cut off wheels, we can cut those bolts off in a few seconds.
Reply 0
Apr 15, 2012 | 02:49 PM
  #413  
Quote: If you need help on Thursday let me know and I'll bring the angle grinder and cut off wheels, we can cut those bolts off in a few seconds.
Got the leaf springs off in once piece, should give me enough room to cut the shackle bolts. No way in hell can you fit an angle grinder in there though, going to have to go with a sawzall.
Reply 0
Apr 17, 2012 | 12:41 PM
  #414  
Guys!!!! Are we meeting up today?????
Reply 0
Apr 17, 2012 | 08:45 PM
  #415  
Quote: Guys!!!! Are we meeting up today?????
I'm open this week anytime. Let's see what day is good for Gary.
Reply 0
Apr 17, 2012 | 09:27 PM
  #416  
How bout tomorrow? 7ish?
Reply 0
Apr 17, 2012 | 09:35 PM
  #417  
Sounds good to me!
Reply 0
Apr 17, 2012 | 11:46 PM
  #418  
Quote: How bout tomorrow? 7ish?
Lol! The wife just reminded me that we have movie plans tomorrow night. Are you guys available any other days?
Reply 0
Apr 18, 2012 | 04:43 AM
  #419  
Oooooo date! Movie date! fuuuun!!!! Darn! I needs to "man-up" and ask my Austin out all ready! Ugh some men are just too difficult and a dodo for not understanding certain things! Am I going off topic??? Lol...anywhos!! Yalls have fun at the movies

Back to the original situation...I is available rest of the week at evening hours. Won't make it next Wednesday cuz I gots a patrol date with my three 25 year old boyfriends haha! My volunteer grandpa who is 75, tells me to tell everyone that lol...anyhow, i'll be around next Tuesday.

Dang! This figuring out the whole meet and greet time thingy is quite poopy ain't it? We are all such busy peepsies.
Reply 0
Apr 18, 2012 | 02:06 PM
  #420  
I'm going to start working 7-12's this weekend, so Im probably not available for the next few weeks!
Reply 0