LAS VEGAS XJ GROUP-----> 1st ROLL CALL.
CF Veteran
Joined: Nov 2011
Posts: 1,314
Likes: 0
From: Las Vegas, NV - St. George, UT
Year: 1996
Model: Cherokee
Engine: 4.0
Senior Member
Joined: Apr 2014
Posts: 840
Likes: 0
From: las vegas, nv
Year: 1991
Model: Cherokee
Engine: I6 H.O, 99 manifold, APN header, neon injectors, cowl intake, screamin demon ignition system
Got an intake off a 91 with ps bracket. 20 obo make an offer
CF Veteran
Joined: Nov 2011
Posts: 1,314
Likes: 0
From: Las Vegas, NV - St. George, UT
Year: 1996
Model: Cherokee
Engine: 4.0
Or any other weekend is free too haha. I'm going Saturday since I get to watch all the rigs from my desk tomorrow
Seasoned Member
Joined: Feb 2013
Posts: 400
Likes: 0
From: North Las Vegas
Year: 2000
Model: Cherokee
Engine: 4.0
Hey guys I have a pair of led pod lights I bought a few months back I need to sell them first person with $100 takes them I paid $125 I also still have the smittybilt gear seat covers for $200 they are in grate condition I only sat in the driver seat three times before I deployed I paid over $300 for them
So the brakes; **** that ****. Went to oreillys and the top hat section a shorter on what they have. So I purchased them. Can home. And now I can't get the new pads to fit over the new rotors. The new calipers won't retract far enough. So now I'm running on crappy old rotors and new pads and calipers. I'm so damn frustrated. I might just take it to just brakes to see if they can figure it out. Ugh.
And I'm crazy. After doing brakes I decided to install the leaf sliders. What's wrong with me. 2 full days of breaking **** on this thing.
And I'm crazy. After doing brakes I decided to install the leaf sliders. What's wrong with me. 2 full days of breaking **** on this thing.
So the brakes; **** that ****. Went to oreillys and the top hat section a shorter on what they have. So I purchased them. Can home. And now I can't get the new pads to fit over the new rotors. The new calipers won't retract far enough. So now I'm running on crappy old rotors and new pads and calipers. I'm so damn frustrated. I might just take it to just brakes to see if they can figure it out. Ugh.
And I'm crazy. After doing brakes I decided to install the leaf sliders. What's wrong with me. 2 full days of breaking **** on this thing.
And I'm crazy. After doing brakes I decided to install the leaf sliders. What's wrong with me. 2 full days of breaking **** on this thing.
Cool thanks
Here's my email to LII.
I just installed my leaf sliders and I'm running into an issue on both sides of my XJ. The leaf sliders are not at the same angle as the leaf springs. So the outside of the leaf spring is gouging into the slider box. There isn't any room for adjustment as the nut strip does not allow for sideways movement.
I'm running a RE 3.5" leaf packs and a C8.25 axle. Nothing special.
Here's a few pictures:
I was really looking forward to these because ride quality is supposed to be great, but right now it rides worse than my stock shackles at 90 degrees. Like I said this is is affecting both sides of my XJ.
Thanks,
Jared
Here's my email to LII.
I just installed my leaf sliders and I'm running into an issue on both sides of my XJ. The leaf sliders are not at the same angle as the leaf springs. So the outside of the leaf spring is gouging into the slider box. There isn't any room for adjustment as the nut strip does not allow for sideways movement.
I'm running a RE 3.5" leaf packs and a C8.25 axle. Nothing special.
Here's a few pictures:
I was really looking forward to these because ride quality is supposed to be great, but right now it rides worse than my stock shackles at 90 degrees. Like I said this is is affecting both sides of my XJ.
Thanks,
Jared



