Let's go sometime Keaka!

 

Get your Jeep on the road so we can wheel out there too!

 

Anyone have any issues here? My wheels are angled, top in towards the wheel well bottom outward, causes a pretty good wobble at 65mph+. Any idea cause and how to fix that

 

check wheel bearings and ball joints... after that its a bent axle. the angle you are refering to is Camber and its not adjustable on solid axles.

 

It runs fine. Just needs an alignment and sye install which I'll do when it gets warmer. Btw you still got that stock rear bumper?

 

you need a toyota 22re oil filter. an angle grinder or hack saw and the tool to remove the oil filter adapter. either a wrench or a torx depending on your year.

the filters


Once the oil filter adapter is off you remove the tube from it



then you remove the alignment roll pin from the block



then you cut down the tube you removed(yes it has to be this short)



then you install said tube into the block( I didnt cut it short enough in this pic)



then you install your new filter





And the number one reason why i did this... because the dealer couldn't get me the right rebuild kit for my OFA

 

So solid axle is automatic have to replace the axle? I'm running stock 96 right now.

Thanks for all the help

 

So I noticed yesturday thy my oil prayer gauge is bouncing way past 80. How do I tell if its the gauge or something serious? I was thinking could be a oil pressure valve? And the pressure sensor is maybe 6 months old but I'm going to change it still

 

Hey ochomyounwouldnt happen to have a part number for those filters? Do I just go up and say hey lemme get an oil filter for a 22re motor from a yota? Reason I ask is my jeep was bought with the ofa already removed

 

When you lift your front tires off the ground do they have any play when you shake them up and down or side to side?

 

No idea... I'll let you know when I get off work... Maybe I should get back to work...

 

Yea. Come pick it up from my work. Won't fit in the Jeep with the car seats.

 

If anyone is heading out to one of the JY's this weekend, would you mind getting a price on a 01 xy sport 4x4 rear passenger fender flare. Glossy black would be preferred but if not, I can always paint it too. Just need a price is all.
Thanks in advance

 

Should be $11 for the flare. According to their site.

 

JY's have sites now. I guess it's been a very long time since I have been to one.
Thanks Driver X.
I guess I will try google to find the websites