mrrecon4

I have to turn the wipers on fast to get them to go on low fast works fine but they only way i can get the low postion is turn them on high first. the itermitten works only when it wants to sometimes if i go from fast to itermitten they well work for a little while and then just stop working
thanks in advance for any help

Gauge

If the switch works at all, then the switch is fine; it either works or it doesn't. What you are describing, it sounds like your wiper control module. It's a little black box tucked up underneath the steering wheel, stuck to the knee guard by velcro. Pull the connector out and clean it really good. Also, it wouldn;t hurt to crack the box open, to see if the electronics are good... maybe clean it.

mrrecon4

thanks i will check it out this week end and let you guys know

Pelican

Year? Always and forever... they are not all the same for this or any other issue.

mrrecon4

it is a 99 sport

JackJare9455

mine has been goofy too... i bought the bushings to replace.. saw on another thread this helped with funky wiper operation.. but what your describing sounds like the pulse board/control module..