seven

Hi, I am working on a 1990 cherokee limited ,4.0 ,auto with it seems like all the options including wood grain..nice truck .., I am having a problem turning off the wipers once they are no longer needed, the only way to shut them off is to stop truck put in park and turn ign off..? It has a tilt col. with the lever on the left built into the turn signal arm.. they are intermittent wipers and I am pretty sure the motor is fine as they turn on no problem when needed. ?? I tried moving the steering col. around and working the lever still nothing. Anybody else run across this problem? Everything else seems to be working fine.. Thanks

seven

Wow!!, nobody has any ideas?? That is a first lol this is is a great site for information , first time that has ever happened ?? hope I am not in for a nightmare!! lol.. Bill

tssguy123

Do they come back on when you turn the Jeep back on?

seven

Only if you switch them on with the lever? It is like the ign is acting like the off position on the switch?? They will not turn back on unless you turn them on..

freegdr

You got delay option ?

Lowrange2

You have a short somewhere. I'm guessing it has something to do with the multi function switch.

You need to start with the wiring diagram of that circuit and see what else is on the circuit.

Things like the headlight sentinel timer have a tendancy to cause issues like that but I doubt those are on the same circuit.

I'd put $2 on the switch.

94XjSport94

I agree with the switch. A broken contacter or a short.

freegdr

Remove delay module . The connectors will plug together with out module see if they shut of normally .

seven

Ok Thanks so we are talking about the muti function switch or lever that would operate the wiper motor and turn signals correct?? I am guessing I have to pull the steering wheel to repair or replace the switch?? Thanks in advance ??

seven

Sorry I jumped ahead where is the delay module?? Thanks

freegdr

Why replace a switch when theres a possible other option.

seven

I agree don`t want to purchase unless I know for sure but I am not sure where that module is?? I am guessing on the steering col. somewhere??

Pelican

I think OP crossed with freegdr post about removing the delay module.

Module is in front of your right knee velcroed up behind the lower dash.

seven

Oh boy that would be great, can`t check it till tom, my nephew has the truck right now ,I would really like to fix it before he leaves for college next week with the truck.. thanks again I will post the results tom.. Bill

seven

Well finally was able to get to checking the truck today, I removed the delay box exactly where you said it would be and the wipers now shut off with the switch..thank you.. my new problem is that they only seem to have one speed slow?? if you turn the lever to high they still move at the same speed?? The delay box is removed and the ends are plugged together., does this seem like a motor or the lever itself ?? Thanks again at least you do not have to shut off truck to shut off wipers but they are moving way to slow..