i changed out my TPS and adjusted the input/output accordingly but im still having the trans stick in a gear and not shifting once in a while
my input voltage was a little low 4.55 instead of the regular 5?? is that ok?
i figured id check out the TCU for bad grounds or something.
my input voltage was a little low 4.55 instead of the regular 5?? is that ok?
i figured id check out the TCU for bad grounds or something.
CF Veteran
tcu is located on the back side of the knee panel on the drivers side.
CF Veteran
Quote:
x2 the one on drivers is the ecmOriginally Posted by Defiance665
^passengers side...
CF Veteran
doh, i can't believe i typed drivers side. lol.
there goes my credibility. haha
there goes my credibility. haha
Caged, your credibility is always strong with me.
I just got back from drive and from the noise and nonsense I was sure the driver must be sitting in the back seat, inlaws eh, lolol
DaveV, which year Cherokee is your trans module suspect on? I have a spare for and AW4 if you need.
Which gear is long shift, or is that variable.
Last time trans fluid and filter changed? Is there a trans power switch on your dash activating and raising the shift points?
Does it act same cold and warmed up?
I just got back from drive and from the noise and nonsense I was sure the driver must be sitting in the back seat, inlaws eh, lolol
DaveV, which year Cherokee is your trans module suspect on? I have a spare for and AW4 if you need.
Which gear is long shift, or is that variable.
Last time trans fluid and filter changed? Is there a trans power switch on your dash activating and raising the shift points?
Does it act same cold and warmed up?