Where can I order this bolt?
02-05-2011, 05:39 PM
#1
Junior Member
Thread Starter
Join Date: Dec 2010
Location: San Angelo, TX
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
Where can I order this bolt?
I need the bolts that connect the TC to the Ujoints and front driveshaft. I cant find them online????
02-05-2011, 05:43 PM
#2
Junior Member
02-05-2011, 06:04 PM
#4
Junior Member
Thread Starter
Join Date: Dec 2010
Location: San Angelo, TX
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
Those are to short. Im looking for the longer ones at the TC end with the double ujoints. Thanks for the help
Trending Topics
02-05-2011, 10:01 PM
#11
CF Veteran
Join Date: Nov 2008
Posts: 2,003
Likes: 0
Received 4 Likes
on
3 Posts
Year: 1987
Model: Cherokee
Engine: 4.0
GUYS!
THIS IS ON THE TRANSFERCASE END! read for christ's sakes. you can not do a u bolt conversion on the transfercase side of the front driveshaft.
it is IIRC an M10 bolt with 1.25 fine thread pitch and an 8mm head. the only bolts you'll find like that at the hardware store have a 13mm head...and take 15 min. per bolt to get in since you have to use an open end wrench.
02-06-2011, 12:48 AM
#13
Senior Member
Join Date: Dec 2010
Location: Elgin,Il.60124
Posts: 798
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 1997 4.0 I6
take some sockets, go to the junk yard, pull/take as many as you need, go to the counter, hit em with the "didnt find what i needed" walk out and go to taco bell with the money you saved. Not too hard!
02-06-2011, 07:37 AM
#14
Junior Member
Thread Starter
Join Date: Dec 2010
Location: San Angelo, TX
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
Thanks for the info guys, Ill check the dealership and then ACE. The JY would be great but there is only one out here with only 3 XJs and one ZJ none of which are 4wd.
02-06-2011, 08:22 PM
#15
CF Veteran
Join Date: Jul 2008
Location: North Olmsted, OH
Posts: 1,265
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
GUYS!
THIS IS ON THE TRANSFERCASE END! read for christ's sakes. you can not do a u bolt conversion on the transfercase side of the front driveshaft.
it is IIRC an M10 bolt with 1.25 fine thread pitch and an 8mm head. the only bolts you'll find like that at the hardware store have a 13mm head...and take 15 min. per bolt to get in since you have to use an open end wrench.
THIS IS ON THE TRANSFERCASE END! read for christ's sakes. you can not do a u bolt conversion on the transfercase side of the front driveshaft.
it is IIRC an M10 bolt with 1.25 fine thread pitch and an 8mm head. the only bolts you'll find like that at the hardware store have a 13mm head...and take 15 min. per bolt to get in since you have to use an open end wrench.
I bought a set of 4 for my front shaft and it was not metric..
Took the shaft with me to get them the second time and they were 5/16 24 (fine thread)