have had clutch issues for a while with not wanting to go in gear. decided to bleed clutch and lo and behold no bleeder screw. What tha? even removed set screw no dice. Is this factory or after market? Now after reading other posts about bent clutch pedals causing same symptoms i looke d at my pedal and it indeed sits 3/4 inch lower than brake pedal. where do i bend it back on the pedal and how do i bend it back? thanks

 

Year would help. I think that 96+ use the hard plastic line and no bleed screw. I bled my 2000 with the help of a friend and several bottles of fluid. I had to remove the pin holding the line into the slave cylinder until clear fluid ran out with no bubbles. My friend poured the fluid in while I did this.