i just did my clutch im getting weird noises when the engine is under load.it doesnt change with my speed or rpms. it stops if i push the clutch in.it almost sounds like exhaust rattling against the body. i cant tell where the sound is coming from


and another noise ive always had but i think i pinpointed is clacking sound coming from the bottom of my oil pan i think. or the front lower. its most noticeable at a idle once im driving i cant tell what going on but this thing is a noisy 2.5l
also when i shut the motor off i get a weird sound sometimes sorta like a weird deisel clatter. what are these symptoms of usually? i know its hard to diagnose with out hearing it so bear with me. the clacking to me sounds internal metal to metal

clutch noise.... thrust bearing???


noise when shutting off..... running on, get it tuned.

check your pcv valve and emission sytem is clear if i was you
j

i dont think its a clutch noise since its 1 day old. fresh tune up too

your first problem is main bearing in the tranny
the knocking in the motor my be rod bearing

i dont have a knocking of any kind, i know what a rod knock is, this isnt that sound.
and second i checked the trans main bearing it had acceptable wear, and like i said it doesnt change with speed and it didnt ever do it before i did the clutch.i think i have a broken motor mount it was just too dark to check

my motor sounds like a deisel at an idle,lol. i think my jeeps a heep! i wish i didnt like my jeep i would just sell it!

the first problem was my exhaust resting on my cross member vibarating. i slipped a leather work glove inbetween by prying and the noise is gone
but now i will have to adjust the hanger some how..probably cut and weld or make a taller bracket.its probably from the lift and tcase drop that its touching now.

maybe the other noise is a noisy oil pump????